Microstructure-permeability relation of porous β-Si3N4 ceramics

被引：24
|
作者：
Topates, Gulsum [1 ]
Mammitzsch, Lars [2 ]
Petasch, Uwe [2 ]
Adler, Joerg [2 ]
Kara, Ferhat [1 ]
Mandal, Hasan [3 ]
机构：
[1] Anadolu Univ, Dept Mat Sci & Engn, TR-26480 Eskisehir, Turkey
[2] Fraunhofer Inst Ceram Technol & Syst IKTS, D-01277 Dresden, Germany
[3] Sabanci Univ, Mat Sci & Engn Programme, TR-34956 Istanbul, Turkey
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2013年 / 33卷 / 09期
关键词：
Si3N4; Structural applications; Microstructure; Porosity; Permeability; SILICON-NITRIDE CERAMICS; GRAIN-GROWTH; MECHANICAL-PROPERTIES; FABRICATION; SI3N4; PERFORMANCE; MEMBRANES; POROSITY; DAMAGE; FLOW;
D O I：
10.1016/j.jeurceramsoc.2012.12.022
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous beta-Si3N4 ceramics with two distinct structures were produced by using two different Si3N4 sources to investigate the relationship between microstructure and permeability. Results showed that regardless of pore amount, size of pore channels, shape-distribution of beta-Si3N4 grains are more effective on permeability of porous Si3N4 ceramics. Higher permeability and lower contribution of inertial forces was obtained by microstructure consists of coarse and equiaxed grains even at lower porosity amount. Calculated Forchheimer number (F-o) and measured the local breadth of a pore also supported the effect of microstructure on permeability. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1545 / 1551
页数：7
相关论文
共 50 条
  • [21] Effects of sintering additive and β-Si3N4 phase contents on the properties of porous Si3N4 ceramics
    Yu, Fang-Li
    Yu, Ping-Ping
    Wang, Jian-Zhi
    Yang, Jian-Feng
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2011, 40 (03): : 772 - 778
  • [22] Fabrication of porous Si3N4 ceramics with controlled porosity by milling of fibrous α-Si3N4 powder
    Xu, Zhaoyun
    Zhang, Yaming
    Wang, Bo
    Yang, Jianfeng
    Liu, Kaikai
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2016, 17 (08): : 840 - 844
  • [23] Fabrication of Si3N4 reticulated porous ceramics reinforced by needle-like β-Si3N4
    Yue, Hongzhi
    Wang, Xin
    Tian, Jintao
    CERAMICS INTERNATIONAL, 2014, 40 (06) : 8525 - 8532
  • [24] Effect of Si3N4 nanowires on the mechanical properties and dielectric constant of porous Si3N4 ceramics
    Zhang, Tianxiang
    Zhang, Xinghong
    Han, Wenbo
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2019, 127 (09) : 602 - 605
  • [25] Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques
    Li, Xiangming
    Zhang, Litong
    Yin, Xiaowei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 549 : 43 - 49
  • [26] Microstructure and mechanical properties of porous Si3N4 ceramics prepared by freeze-casting
    Xia, Yongfeng
    Zeng, Yu-Ping
    Jiang, Dongliang
    MATERIALS & DESIGN, 2012, 33 : 98 - 103
  • [27] Enhancement of thermal shock resistance in β-Si3N4 coating with in situ synthesized β-Si3N4 nanowires/nanobelts on porous Si3N4 ceramics
    Wang, Chao
    Wang, Xu
    Wang, Binglei
    Xiao, Guozheng
    Qiao, Ruiqing
    Zhang, Fan
    Bai, Yu
    Li, Yizhuo
    Wu, Yusheng
    Wang, Zhanjie
    Wang, Hongjie
    CERAMICS INTERNATIONAL, 2021, 47 (18) : 25449 - 25457
  • [28] Correlation between microstructure and toughness of hot pressed Si3N4 ceramics seeded with β-Si3N4 particles
    De Pablos, A
    Osendi, MI
    Miranzo, P
    CERAMICS INTERNATIONAL, 2003, 29 (07) : 757 - 764
  • [29] Preparation of Si3N4 ceramics by aligning α-Si3N4 whiskers
    Bi, Yu-Hui
    Li, Jun
    Chen, Fei
    Zhang, Dong-Ming
    Shen, Qiang
    Zhang, Lian-Meng
    HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2, 2008, 368-372 : 881 - 884
  • [30] Fabrication of Si3N4-based seal coating on porous Si3N4 ceramics
    Shen, Qiang
    Yang, Ying
    Chen, Fei
    Zhang, Lianmeng
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 42 (1-2): : 12 - 20
12345