Design Considerations for Control of Traction Drive with Permanent Magnet Synchronous Machine

被引：2
|
作者：
Peroutka, Zdenek [1 ]
Zeman, Karel [1 ]
机构：
[1] Univ W Bohemia, Dept Electromech & Power Elect, Plzen 30614, Czech Republic
来源：
2008 13TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-5 | 2008年
关键词：
Control of drive; permanent magnet motor; rail vehicle; synchronous motor; traction application; vector control;
D O I：
10.1109/EPEPEMC.2008.4635484
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This contribution deals with the control of the wheel drive with permanent magnet synchronous machine of the tram car. In order to achieve minimal dimensions of PMSM and on the other hand to be able to provide sufficient torque, the drive is operating in very wide speed range in the field weakening and with the machine load angle of 90 degrees. Thus, the new problem introduced by this drive is requirement for the limitation of the load angle. This paper presents proposed drive control, simulation results of tram drive prototype and experimental evidence of designed laboratory prototype of rated power of 10.7kW.
引用
收藏
页码：1529 / 1534
页数：6
相关论文
共 50 条
  • [21] Position-sensorless control of direct drive permanent magnet synchronous motors for railway traction
    Frenzke, T
    Piepenbreier, B
    PESC 04: 2004 IEEE 35TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, CONFERENCE PROCEEDINGS, 2004, : 1372 - 1377
  • [22] ROBUST PID/BACKSTEPPING CONTROL DESIGN FOR PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVE
    Hemici, B.
    Nezli, L.
    Tadjine, M.
    Boucherit, M. S.
    CONTROL AND INTELLIGENT SYSTEMS, 2006, 34 (03)
  • [23] Vector Control Of Permanent Magnet Synchronous Machine
    Petri, Ana-Maria
    Petreus, Dorin
    2020 IEEE 26TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME 2020), 2020, : 390 - 393
  • [24] Robust PID/backstepping control design for permanent magnet synchronous motor drive
    Process Control Laboratory, Electrical Engineering Department, Ecole Nationale Polytechnique, 10, ave. Hassen Badi, El-Harraech Algers, Algeria
    Control Intell Syst, 2006, 3 (194-204):
  • [25] Robust control of a permanent magnet synchronous machine
    Coman, Simona
    Comnac, V.
    Boldisor, Cr.
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOLS 1-5, 2012, : 594 - 599
  • [26] Control Techniques for Permanent Magnet Synchronous Motor Drive
    Rafa, S.
    Larabi, A.
    Hocine, L.
    Barazane, L.
    18TH MEDITERRANEAN CONFERENCE ON CONTROL AND AUTOMATION, 2010, : 1115 - 1120
  • [27] Permanent Magnet Synchronous Machine Design for Hybrid Traction Applications: Impact of Magnetic Laminations Materials
    Nedjar, B.
    Hlioui, S.
    Vido, L.
    Gabsi, M.
    Amara, Y.
    Hoang, E.
    Miraoui, A.
    IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE 2010), 2010, : 1426 - 1431
  • [28] Design and Optimization of an Axial-Flux Permanent Magnet Synchronous Machine for Railway Traction Application
    Dranca, Marius
    Chirca, Mihai
    Breban, Stefan
    Fartan, Marius
    PROCEEDINGS OF 2019 8TH INTERNATIONAL CONFERENCE ON MODERN POWER SYSTEMS (MPS), 2019,
  • [29] Control of Permanent Magnet Synchronous Machine Wheel Drive for Low-Floor Tram
    Peroutka, Zdenek
    Zeman, Karel
    Krus, Frantisek
    Kosta, Frantisek
    EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9, 2009, : 4121 - +
  • [30] Design Considerations on E-core for Modular and Scalable Permanent Magnet Synchronous Machine
    Ayaz, Murat
    Bakbak, Ali
    Canseven, Huseyin Tayyer
    Altintas, Mert
    Mese, Erkan
    Akin, Ozkan
    Boztepe, Mutlu
    2020 6TH INTERNATIONAL CONFERENCE ON ELECTRIC POWER AND ENERGY CONVERSION SYSTEMS (EPECS 2020), 2020, : 141 - 145
12345