The microstructure and environment influence on fatigue crack growth in 7049 aluminum alloy at different load ratios

被引：0
|
作者：
Fonte, MA
Stanzl-Tschegg, SE
Holper, B
Tschegg, EK
Vasudévan, AK
机构：
[1] Univ Agr Sci, Inst Met & Phys, A-1180 Vienna, Austria
[2] Naut Sch, P-2780572 Paco De Arcos, Portugal
[3] Vienna Univ Technol, Inst Appl & Tech Phys, A-1040 Vienna, Austria
[4] Off Naval Res Lab, Arlington, VA 22217 USA
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2001年 / 23卷
关键词：
fatigue crack growth; near-threshold fatigue; K-max; Delta K-th; microstructure; corrosion fatigue; slip mode; load ratio; 7049; and; 7075; alloys;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The role of microstructure and environmental influence on fatigue crack has been investigated on a high strength 7049 aluminium alloy, artificially aged to underaged (UA) and overaged (OA) microstructures with approximately the same yield strength properties, but differing in the mode of slip deformation. The UA alloy deforms by planar slip while the OA alloy by wavy slip. Crack growth measurements were performed at constant load ratios, between 0.8 and -1, in ambient air and vacuum. The influence of load ratio is discussed in terms of slip deformation mechanisms, microstructure, and the influence of environment using die two intrinsic parameters, DeltaK and K-max. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：S311 / S317
页数：7
相关论文
共 50 条
  • [41] Fatigue crack growth in an aluminum alloy-fractographic study
    Salam, I.
    Muhammad, W.
    Ejaz, N.
    14TH INTERNATIONAL SYMPOSIUM ON ADVANCED MATERIALS (ISAM 2015), 2016, 146
  • [42] Fatigue crack nucleation and small crack growth in an extruded 6061 aluminum alloy
    McCullough, R. R.
    Jordon, J. B.
    Allison, P. G.
    Rushing, T.
    Garcia, L.
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 119 : 52 - 61
  • [43] Environmental Effects on Fatigue Crack Growth in 7075 Aluminum Alloy
    Bonakdar, A.
    Wang, F.
    Williams, J. J.
    Chawla, N.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (08): : 2799 - 2809
  • [44] Environmental Effects on Fatigue Crack Growth in 7075 Aluminum Alloy
    A. Bonakdar
    F. Wang
    J. J. Williams
    N. Chawla
    Metallurgical and Materials Transactions A, 2012, 43 : 2799 - 2809
  • [45] FATIGUE CRACK GROWTH AND RETARDATION IN A POWDER ALUMINUM-ALLOY
    CORBLY, DM
    JOM-JOURNAL OF METALS, 1976, 28 (12): : A59 - A60
  • [46] The effect of load excursions on fatigue crack growth in a titanium alloy
    Lemm, DE
    Stephens, RI
    Stephens, RR
    PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 1: FATIGUE AND FRACTURE, 1999, : 128 - 133
  • [47] Effect of load histories on scatter of fatigue crack growth in aluminum alloy 2024-T351
    Dominguez, J
    Zapatero, J
    Pascual, J
    ENGINEERING FRACTURE MECHANICS, 1997, 56 (01) : 65 - 76
  • [48] Fatigue Crack Growth Prediction under Spectrum Load Sequence in an Aluminum Alloy by K*-RMS Approach
    Manjunatha, C. M.
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2008, 17 (06) : 477 - 492
  • [49] The influence mechanism of water jet peening on the fatigue crack growth behavior of 7075 aluminum alloy
    Zhang, Ping
    Gao, Yeran
    Zhang, Jinlong
    Yue, Xiujie
    Zhou, Hanping
    Sun, Yajie
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 187
  • [50] Small fatigue crack growth behavior of titanium alloy TC4 at different stress ratios
    Hu, Xu-Teng
    Zhu, Lei
    Jiang, Rong
    Song, Ying-Dong
    Qu, Shou-Dao
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2019, 42 (01) : 339 - 351
12345