Study of the influence of punched contour geometry over the punch force using finite element analysis

被引：0

作者：

Utuleanu, Stelian ^{[1
,2
]}

Vlase, Aurelian ^{[1
]}

Sindila, Gheorghe ^{[1
]}

Capatana, Nicolae ^{[1
]}

机构：

[1] Univ Politehn Bucuresti, Fac Engn & Management Technol Syst, Splaiul Independentei 313, Bucharest 060042, Romania

[2] ICPE SA Special Elect Machines, Splaiul Unirii 313, Bucharest 030138, Romania

来源：

21ST INNOVATIVE MANUFACTURING ENGINEERING & ENERGY INTERNATIONAL CONFERENCE - IMANE&E 2017 | 2017年 / 112卷

关键词：

D O I：

10.1051/matecconf/201711202007

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

When is calculated the punching force is taken into account only the perimeter and not its form. In this case, the pressing force for the contours with the same length, but with different geometries (circle, square, hexagon, triangle and shearing) may have different values. To demonstrate this hypothesis were made experimental tests and they confirm this supposition. Now this hypothesis is verified using the finite element analysis in order to show the possible differences and to view the material behavior during punching process. The analyzed materials are AISI 304, DC01 (AISI 1008), Al99.8 and Brass CDA 110. The software used to make the finite element analysis is Deform 3D version 6.1 (service pack 2).

引用

页数：6

共 50 条

[21] Finite-Element Analysis of the Influence of Edge Geometry on Shot Peening Process
Xu, Jifeng
Koch, William J.
JOURNAL OF AEROSPACE ENGINEERING, 2009, 22 (02) : 153 - 159
[22] Finite Element Analysis of Stent expansion: Influence of Stent Geometry on Performance Parameters
Gomes, I. V.
Puga, H.
Alves, J. L.
Claro, J. C. P.
2017 IEEE 5TH PORTUGUESE MEETING ON BIOENGINEERING (ENBENG), 2017,
[23] Influence of Implant Length, Diameter, and Geometry on Stress Distribution: A Finite Element Analysis
Anitua, Eduardo
Tapia, Raul
Luzuriaga, Felipe
Orive, Gorka
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY, 2010, 30 (01) : 89 - 95
[24] Finite element force analysis of mechanisms
Hari, Y
AlSoudi, J
CAD/CAM ROBOTICS AND FACTORIES OF THE FUTURE, 1996, : 716 - 721
[25] Influence of Cavity Geometry on the Fracture Strength of Dental Restorations: Finite Element Study
Neto, Maria A.
Roseiro, Luis
Messias, Ana
Falacho, Rui I.
Palma, Paulo J.
Amaro, Ana M.
APPLIED SCIENCES-BASEL, 2021, 11 (09):
[26] Finite element analysis of plastic deformation in shear punch test
Zergani, Aqil
Mirzadeh, Hamed
Mahmudi, Reza
MATERIALS LETTERS, 2021, 284
[27] Effects of Defect Geometry on MFL Signals Using Finite Element Analysis
Song, Qiang
Lin, Li
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 2, 2009, : 27 - 31
[28] Finite element analysis of punch-through mitigation with perforation
Gao Pan
Liu Xiu-li
Duan Meng-lan
Li Ming-jie
ROCK AND SOIL MECHANICS, 2016, 37 (563-569 and 576) : 563 - 569
[29] Finite element analysis of shear punch testing and experimental validation
Goyal, Sunil
Karthik, V.
Kasiviswanathan, K. V.
Valsan, M.
Rao, K. Bhanu Sankara
Raj, Baldev
MATERIALS & DESIGN, 2010, 31 (05) : 2546 - 2552
[30] Study on experiment and finite element modelling of small punch test
Zhang, Xianlong
Ding, Zhaonan
Chen, Yuguang
Zhang, Liqing
Zhang, Chonghong
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2019, 544

← 1 2 3 4 5 →