Using dynamic analysis for compact gear design

被引:5
|
作者
Lin, PH [1 ]
Lin, HH [1 ]
Oswald, FB [1 ]
Townsend, DP [1 ]
机构
[1] Univ Memphis, Dept Mech Engn, Memphis, TN 38152 USA
关键词
Bending strength - Dynamic mechanical analysis - Dynamic response - Natural frequencies - Stresses;
D O I
10.1115/1.1423637
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents procedures for designing compact spur gear sets with the objective of minimizing the gear size. The allowable tooth stress and dynamic response are incorporated in the process to obtain a feasible design region. Various dynamic rating factors were investigated and evaluated. The constraints of contact stress limits and involute interference combined with the tooth bending strength provide the main criteria for this investigation. A three-dimensional design space involving the gear size, diametral pitch, and operating speed was developed to illustrate the optimal design of spur gear pairs. The study performed here indicates that as gears operate over a range of speeds, variations in the dynamic response change the required gear size in a trend that parallels the dynamic factor. The dynamic factors are strongly affected by the system natural frequencies. The peak values of the dynamic factor within the operating speed range significantly influence the optimal gear designs. The refined dynamic factor introduced in this study, yields more compact designs than AGMA dynamic factors.
引用
收藏
页码:91 / 97
页数:7
相关论文
共 50 条
  • [41] Analysis and design of satellite gear trains
    Yang, Ping
    Jixie Kexue Yu Jishu/Mechanical Science and Technology, 1996, 15 (06):
  • [42] Design and analysis of a spiral bevel gear
    Lagresle, Charly
    de Vaujany, Jean-Pierre
    Guingand, Michele
    ADVANCES ON MECHANICS, DESIGN ENGINEERING AND MANUFACTURING, 2017, : 739 - 746
  • [43] Formal design and analysis of a gear controller
    Lindahl M.
    Pettersson P.
    Yi W.
    International Journal on Software Tools for Technology Transfer, 2001, 3 (03) : 353 - 368
  • [44] Analysis and Design of Differential bevel gear
    Wang, Pei-Yu
    Liu, Kuang-Lun
    PROCEEDINGS OF THE 2018 IEEE INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING (IEEE ICAM), 2018, : 243 - 245
  • [45] Formal design and analysis of a gear controller
    Lindahl, M
    Pettersson, P
    Yi, W
    TOOLS AND ALGORITHMS FOR THE CONSTRUCTION AND ANALYSIS OF SYSTEMS, 1998, 1384 : 281 - 297
  • [46] Thermal design analysis of compact heat exchanger using nanofluids
    Department of Mechanical Engineering, National Institute of Technology, Warangal 506 021, India
    不详
    不详
    Int. J. Nanomanufacturing, 2008, 3 (271-288):
  • [47] Dynamic Response Analysis of Gear Transmission System with Dynamic Backlash
    Liu J.
    Zhao W.
    Ren W.
    Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, 2020, 40 (06): : 1184 - 1190
  • [48] A dynamic stiffness method for dynamic analysis of spur gear pairs
    Huang, Kuo-Jao
    Liu, Tzong-Shi
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2002, 23 (04): : 389 - 394
  • [49] Nonlinear Dynamic Analysis of a Trochoid Cam Gear
    Yang, Ronggang
    Han, Bo
    Li, Fengping
    Zhou, Yuqing
    Xiang, Jiawei
    JOURNAL OF MECHANICAL DESIGN, 2020, 142 (09)
  • [50] Analysis of dynamic properties of a coaxial magnetic gear
    Kolodziej, Janusz
    Kowol, Marcin
    Lukaniszyn, Marian
    Gabor, Rafal
    PRZEGLAD ELEKTROTECHNICZNY, 2019, 95 (04): : 246 - 249