Effects of Ag content on the solid-solution and age-hardening behavior of a Mg-5Sn alloy

被引:31
|
作者
Huang, Xuefei [1 ]
Du, Yibo [1 ]
Li, Wandong [1 ]
Chai, Yiting [1 ]
Huang, Weigang [1 ]
机构
[1] Sichuan Univ, Coll Mat Sci & Engn, Chengdu 610065, Peoples R China
基金
中国国家自然科学基金;
关键词
Mg alloy; Precipitation; Age-hardening; Mg2Sn; Micro-alloying; SN-BASED ALLOYS; MG; ZN; ENHANCEMENT; IMPROVEMENT; REFINEMENT; KINETICS;
D O I
10.1016/j.jallcom.2016.12.071
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Effects of Ag content (0-2 wt%) on the solid-solution and ageing behavior of a Mg-5Sn alloy were investigated. In the solution-treated state, addition of 0.5 wt% Ag can clearly improve the hardness of the Mg-5Sn alloy, while further additions of Ag increase the hardness only a little. On contrary, the age-hardening response of the Mg-5Sn alloy is enhanced proportionally with the amount of Ag added. The microstructure of the peak-aged Mg-5Sn-xAg (x = 0, 0.5, 1, 2) alloys are mainly composed of alpha-Mg matrix and Mg2Sn precipitates. TEM results show that as the Ag additions increase, the number density of the Mg2Sn precipitates increase and the aspect ratio is also reduced, which mainly account for the improved precipitation-hardening response. Retained Ag atoms in alpha-Mg solid solutions also contribute to the strengthening effect in the peak-aged state. Minor blocky Mg54Ag17 particles were observed in the Mg5Sn-2Ag alloy. The particles adopt an orientation relationship of [1 2 0](p)//[1 0 -1 0](alpha), (0 0 2) (p)//(0 0 0 2)(alpha) with respect to alpha-Mg matrix. The role of Ag during the precipitation process has also been discussed. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:850 / 855
页数:6
相关论文
共 50 条
  • [41] AGE-HARDENING RESPONSE FOR Mg96.17Zn3.15Y0.5Zr0.18 SOLID SOLUTION ALLOY UNDER HIGH PRESSURE
    Fan Zhibin
    Lin Xiaoping
    Dong Yun
    Ye Jie
    Li Chan
    Li Bo
    ACTA METALLURGICA SINICA, 2016, 52 (12) : 1491 - 1496
  • [42] Effect of solution treatment on precipitation and age-hardening response of an Al-4Mg-1Cu-0.5Si-0.4Ag (wt%) alloy
    Li, C.
    Sha, G.
    Xia, J. H.
    Gun, B.
    Li, L.
    Cui, J. Z.
    Liu, X. F.
    Ringer, S. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 599 : 64 - 68
  • [43] Effect of pre-compression deformation on aging precipitation behavior and mechanical properties of Mg-5Sn alloy
    Huang, Meilin
    Zeng, Ying
    Xiong, Xunfei
    Fu, Ruihao
    Li, Shupeng
    Qian, Xiaoying
    Jiang, Bin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 7645 - 7655
  • [44] Microstructure Evolution and Age-hardening Behavior of Mg-Sm-Ca Alloy Processed by High Pressure Torsion
    Liu X.
    Li Y.
    Man Y.
    Wang J.
    Xu R.
    1600, Cailiao Daobaoshe/ Materials Review (35): : 6120 - 6125
  • [45] Effect of annealing on microstructure evolution and age-hardening behavior of dilute Mg-Al-Ca-Mn alloy
    Zuo, J.
    Nakata, T.
    Xu, C.
    Xia, Y. P.
    Shi, H. L.
    Wang, G. S.
    Tang, G. Z.
    Fan, G. H.
    Kamado, S.
    Geng, L.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 : 1754 - 1762
  • [46] Effects of cooling rate in homogenization on microstructure, hot deformation resistance and subsequent age-hardening behavior of an Al-Mg-Si alloy
    Jin, Dong
    Li, Hongying
    Zhu, Zhixiang
    Yang, Changlong
    Chen, Baoan
    Miao, Yaojun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 3283 - 3300
  • [47] Corrosion behavior of as-cast Mg-5Sn based alloys with In additions in 3.5 wt% NaCl solution
    Wang, Xuejian
    Chen, Zongning
    Ren, Jing
    Kang, Huijun
    Guo, Enyu
    Li, Jiehua
    Wang, Tongmin
    CORROSION SCIENCE, 2020, 164 (164)
  • [48] Age hardening behavior of Mg-1.2Sn-1.7Zn alloy containing Al
    Sasaki, T. T.
    Ohkubo, T.
    Hono, K.
    MAGNESIUM TECHNOLOGY 2012, 2012, : 181 - 185
  • [49] Effect of double aging and microalloying on the age hardening behavior of a Mg-Sn-Zn alloy
    Sasaki, T. T.
    Oh-ishi, K.
    Ohkubo, T.
    Hono, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 1 - 8
  • [50] CREEP AND SUBSTRUCTURE FORMATION IN AN AL-5-PERCENT MG SOLID-SOLUTION ALLOY
    YAVARI, P
    MOHAMED, FA
    LANGDON, TG
    ACTA METALLURGICA, 1981, 29 (08): : 1495 - 1507