Megahertz opto-mechanical modulator

被引：18
|
作者：
Marxer, C
Gretillat, MA
Jaecklin, VP
Baettig, R
Anthamatten, O
Vogel, P
机构：
[1] ESEC SA,CH-6330 CHAM,SWITZERLAND
[2] ASCOM TECH,CH-3018 BERN,SWITZERLAND
来源：
SENSORS AND ACTUATORS A-PHYSICAL | 1996年 / 52卷 / 1-3期
关键词：
micromachining; modulators; opto-mechanical systems;
D O I：
10.1016/0924-4247(96)80124-5
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper a Fabry-Perot modulator fabricated by surface micromachining is presented. The modulator is optimized for a wavelength of 1.3 mu m and intended for fiber-in-the-loop applications. It consists of a double-supported polysilicon beam separated from an underlying polysilicon electrode by an air gap. The two polysilicon electrodes form the mirrors of the Fabry-Perot cavity, By electrostatic actuation the optical path between the mirrors can be reduced, which results in modulation of the reflectivity. Characterization of the modulator shows a maximum on-off ratio of 9 dB. The observed modulator behavior indicates a maximum modulation rate of 2.8 Mbit s(-1).
引用
收藏
页码：46 / 50
页数：5
相关论文
共 50 条
  • [41] Optical and opto-mechanical design of spectrometers for PRIMA
    Rodgers, J. Michael
    McGuire, James P.
    Tieu, Vincent
    Calvet, Robert J.
    Bradford, Charles M.
    UV/OPTICAL/IR SPACE TELESCOPES AND INSTRUMENTS: INNOVATIVE TECHNOLOGIES AND CONCEPTS XI, 2023, 12676
  • [42] Opto-mechanical design of the KMOS spectrograph module
    Tecza, Matthias
    Lewis, Ian J.
    Lynn, James
    Yang, Stephanie
    Thatte, Niranjan A.
    Tosh, Ian A. J.
    Ferlet, Marc J.
    GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY, PTS 1- 3, 2006, 6269
  • [43] Phase Noise Modeling of Opto-Mechanical Oscillators
    Tallur, Siddharth
    Sridaran, Suresh
    Bhave, Sunil A.
    Carmon, Tal
    2010 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM (FCS), 2010, : 268 - 272
  • [44] Opto-Mechanical Assembly and Analysis of Imaging Spectrometer
    Zhang, Quan
    Li, Xin
    Zheng, Xiaobing
    5TH INTERNATIONAL SYMPOSIUM OF SPACE OPTICAL INSTRUMENTS AND APPLICATIONS, 2020, 232 : 263 - 272
  • [45] ANALYTICAL COMPACT MODEL FOR OPTO-MECHANICAL SENSOR
    Dawale, Houssein Elmi
    Jourdan, Guillaume
    Sibeud, Loic
    Regord, Sebastien
    Lamberti, Fabrice
    Hentz, Sebastien
    Badets, Franck
    2020 33RD IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS 2020), 2020, : 869 - 872
  • [46] Opto-mechanical interactions in split ball resonators
    Sun, Yue
    Suchkov, Sergey V.
    Miroshnichenko, Andrey E.
    Sukhorukov, Andrey A.
    METAMATERIALS, METADEVICES, AND METASYSTEMS 2015, 2015, 9544
  • [47] Present opto-mechanical design status of NFIRAOS
    Byrnes, Peter W. G.
    Atwood, Jenny
    Boucher, Marc-Andre
    Fitzsimmons, Joeleff
    Hill, Alexis
    Herriot, Glen
    Spano, Paolo
    Szeto, Kei
    Wevers, Ivan
    ADAPTIVE OPTICS SYSTEMS IV, 2014, 9148
  • [48] OPTO-MECHANICAL SYSTEM FOR LASER BEAM DISTRIBUTION
    Macuchova, Karolina
    Hermanek, Jan
    Rehakova, Martina
    MM SCIENCE JOURNAL, 2019, 2019 : 3598 - 3601
  • [49] DOTIFS: Spectrograph optical and opto-mechanical design
    Chung, Haeun
    Ramaprakash, A. N.
    Khodade, Pravin
    Modi, Deepa
    Rajarshi, Chaitanya V.
    Chattopadhyay, Sabyasachi
    Chordia, Pravin A.
    Joshi, Vishal
    Hong, Sungwook E.
    Omar, Amitesh
    Ravindranath, Swara
    Park, Yong-Sun
    Park, Changbom
    GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY VII, 2018, 10702
  • [50] Opto-mechanical design of SCUBA-2
    Atad-Ettedgui, Eli
    Peacocke, Tully
    Montgomery, David
    Gostick, David
    McGregor, Helen
    Cliff, Mark
    OPTOMECHANICAL TECHNOLOGIES FOR ASTRONOMY, PTS 1 AND 2, 2006, 6273
12345