Coarsening Kinetics of Semi-solid A356-5wt%TiB2 in situ Composite

被引：5

作者：

Kumar, S. Deepak ^{[1
]}

Acharya, Mihira ^{[2
]}

Mandal, A. ^{[2
]}

Chakraborty, M. ^{[3
]}

机构：

[1] Indian Inst Technol Bhubaneswar, Sch Mech Sci, Bhubaneswar 751007, Odisha, India

[2] Indian Inst Technol Bhubaneswar, Sch Minerals Met & Mat Engn, Bhubaneswar 751007, Odisha, India

[3] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2015年 / 68卷 / 06期

关键词：

Cooling slope casting; Coarsening; A356; alloy; TiB2; Ostwald ripening; MICROSTRUCTURAL EVOLUTION; A356; ALLOY; BEHAVIOR;

D O I：

10.1007/s12666-015-0648-z

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

An attempt has been made to investigate the coarsening behaviour of semisolid A356-5wt%TiB2 in situ composite produced by Cooling slope casting. It was found that the average grain size of alpha-Al in the gravity-cast alloy got reduced from 98 to 48 A mu m in the semi-solid A356-5TiB(2) composite. The primary alpha-Al in the composite were found to undergo substantial spheroidisation after 5 min at a reheating temperature of 585 A degrees C (f (s) = 0.5). Further, increase in holding time from 5 to 15 min resulted in grain growth of alpha-Al in both the alloy and the composites. The coarsening rate constant, K, for A356-5wt%TiB2 composite was found to be 339.73 mu m(3)/s which is 32 % lower than that of semi-solid A356 alloy, thus proving the effectiveness of TiB2 particles towards grain coarsening.

引用

页码：1075 / 1080

页数：6

共 50 条

[41] CeO2 induced dispersive distribution of TiB2 particles in in situ TiB2/Al composite
Xue, J.
Han, Y. F.
Lei, J. B.
Wang, J.
Sun, B. D.
MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (08) : 871 - 875
[42] Study on the initial electrodeposition behavior of aluminum on TiB2/A356 composite
Huang, W. M.
Liu, B.
Wang, M. L.
Liu, Y.
Wang, H. W.
Ma, N. H.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2014, 65 (05): : 502 - 508
[43] Densification kinetics, phase assemblage and hardness of spark plasma sintered Cu–10 wt% TiB2 and Cu–10 wt% TiB2–10 wt% Pb composites
Amit S. Sharma
Nisha Mishra
Krishanu Biswas
Bikramjit Basu
Journal of Materials Research, 2013, 28 : 1517 - 1528
[44] The Constitutive Model and Processing Map for in-situ 5wt% TiB2 Reinforced 7050 Al Alloy Matrix Composite
Wang, Mingliang
Chen, Zhe
Chen, Dong
Wu, Yi
Li, Xianfeng
Ma, Naiheng
Wang, Haowei
RECENT HIGHLIGHTS IN ADVANCED MATERIALS, 2014, 575-576 : 11 - 19
[45] Development of TiB2 reinforced aluminum foundry alloy based in situ composites - Part I: An improved halide salt route to fabricate Al-5 wt%TiB2 master composite
Chen, Zongning
Wang, Tongmin
Zheng, Yuanping
Zhao, Yufei
Kang, Huijun
Gao, Lei
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 605 : 301 - 309
[46] On the age hardening behavior of thixoformed A356-5TiB2 in-situ composite
Kumar, S. Deepak
Mandal, A.
Chakraborty, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 636 : 254 - 262
[47] On in-situ forming TiB2 reinforced Al composite
Ma, Zongyi
Bi, Jing
Lu, Yuxiong
Shen, Hongwei
Gao, Yinxuan
Acta Metallurgica Sinica Series B, Process Metallurgy & Miscellaneous, 1993, 6 B (02): : 122 - 125
[48] In situ preparation of TiB2 reinforced Al base composite
Lu, L
Lai, MO
Chen, FL
ADVANCED COMPOSITE MATERIALS, 1997, 6 (04) : 299 - 308
[49] Effects of Technical Parameters of Semi-Solid Stirring and Rheo-Rolling on Microstructure of A356-5wt.%B4C Composite Strip
Zhang, Jian
Guan, Ren-Guo
Tie, Di
Wang, Xiang
Guan, Xi-Hua
Chen, Ben-Chao
Chen, Yu
MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (03) : 340 - 345
[50] ON THE IN-SITU FORMING TiB2 REINFORCED AI COMPOSITE
MA Zongyi
BI Jing
LU Yuxiong
SHEN Hongwei
GAO Yinxuan Institute of Metal Research
Acta Metallurgica Sinica(English Edition), 1993, (08) : 122 - 125

← 1 2 3 4 5 →