Experimental and finite element investigation on wrinkling behaviour in deep drawing process of A13105/Polypropylene/Stee1304 sandwich sheets

被引：15

作者：

Atrian, Amir ^{[1
]}

Panahi, Hamed ^{[1
]}

机构：

[1] Islamic Azad Univ, Dept Mech Engn, Najafabad Branch, Najafabad, Iran

来源：

PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018 | 2018年 / 15卷

关键词：

Sandwich sheet; Deep drawing; Wrinkling; Finite element;

D O I：

10.1016/j.promfg.2018.07.396

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The three-layer aluminum 3105 polypropylene 304 steel components are fabricated using the deep drawing process. Then, finite element (FE) simulation of this process was carried out in ABAQUS software and the results of numerical and experimental studies regarding the effects of blank holder force on wrinkling of blank's flange and punch force were compared to each other. The results indicate a reduction in wrinkling of the deep drawn cups with increase in BHF. In addition, FE simulation could predict the tearing place in the samples well. (C) 2018 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the scientific committee of the 17th International Conference on Metal Forming.

引用

页码：984 / 991

页数：8

共 32 条

[1] Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory
Kim, JB
Yoon, JW
Yang, DY
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2003, 56 (12) : 1673 - 1705
[2] Experimental and simulated comparison of finite element models of bimetallic sheets for deep drawing process
Dengiz, Cengiz Gorkem
Yildizli, Kemal
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (11-12): : 3599 - 3614
[3] Experimental and simulated comparison of finite element models of bimetallic sheets for deep drawing process
Cengiz Görkem Dengiz
Kemal Yildizli
The International Journal of Advanced Manufacturing Technology, 2021, 117 : 3599 - 3614
[4] Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process
Morovvati, Mohammad Reza
Fatemi, Afshin
Sadighi, Mojtaba
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 54 (1-4): : 113 - 121
[5] Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process
Mohammad Reza Morovvati
Afshin Fatemi
Mojtaba Sadighi
The International Journal of Advanced Manufacturing Technology, 2011, 54 : 113 - 121
[6] Experimental and Finite Element Investigation of Roll Drawing Process
F. Lambiase
A. Di Ilio
Journal of Materials Engineering and Performance, 2012, 21 : 161 - 166
[7] Experimental and Finite Element Investigation of Roll Drawing Process
Lambiase, F.
Di Ilio, A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (02) : 161 - 166
[8] Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory
Kim, JB
Yoon, JW
Yang, DY
Barlat, F
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 111 (1-3) : 170 - 174
[9] The effects of tooling imperfections on the initiation of wrinkling in finite element modeling of a deep drawing process
Hematian, J
Wild, PM
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (04): : 442 - 446
[10] The effects of tooling imperfections on the initiation of wrinkling in finite element modeling of a deep drawing process
Hematian, J.
Wild, P.M.
American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 2000, 11 : 737 - 741

← 1 2 3 4 →