STUDY ON THE EFFECT OF NATURAL CLIMATE ON THE CORROSION OF REBAR IN CONCRETE

被引:0
|
作者
Jiang, Jianhua [1 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Jiangsu, Peoples R China
关键词
Natural climate; micro-environment; corrosion rate; temperature; relative humidity; REINFORCEMENT;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Natural climate is an important factor that affects the durability of reinforced concrete (RC) structures, and therefore must be taken into account in the degradation models for durability of RC structures. In order to investigate the development of corrosion rate of the reinforcing rebar in concrete under natural climate environment, the long-term test on the corrosion of the rebar in concrete was carried out under the sheltered condition in natural climate; at the same time, the test on the response of the micro-environment of concrete corresponding to the natural climate environment was also conducted in order to analyze the effect of natural climate on corrosion of rebar in concrete. The results show that, the corrosion rate of the rebar in concrete under natural climate environment is fluctuant and time-dependent; the changes in environmental condition of the micro-environment of concrete lag behind that of natural climate, especially in relative humidity. It is concluded that the corrosion of the rebar in concrete is directly affected by the micro-environment of concrete that depends on the random fluctuations of natural climate, and temperature is the primary factor that influences the corrosion of rebar in concrete under sheltered condition of normal atmospheric environment.
引用
收藏
页码:222 / 226
页数:5
相关论文
共 50 条
  • [21] Numerical simulation of electrochemical mechanism of steel rebar corrosion in concrete under natural climate with time-varying temperature and humidity
    Zhang, Guoyi
    Zhu, Yifei
    Lin, Xingmin
    Tian, Ye
    Ye, Hailong
    Jin, Xianyu
    Jin, Nanguo
    Yan, Dongming
    Xiao, Feng
    Yao, Kangwei
    Chen, Jin
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 306
  • [22] Change characteristic and mechanism of rebar corrosion rate with time in concrete under constant climate
    Ji, Yong-Sheng
    Yuan, Ying-Shu
    Zhongguo Kuangye Daxue Xuebao/Journal of China University of Mining and Technology, 2007, 36 (02): : 153 - 158
  • [23] Effect of Microstructures on the Corrosion Behavior of Reinforcing Bars (Rebar) Embedded in Concrete
    Katiyar, Prvan Kumar
    Behera, Prasanna Kumar
    Misra, Sudhir
    Mondal, K.
    METALS AND MATERIALS INTERNATIONAL, 2019, 25 (05) : 1209 - 1226
  • [24] Effect of Microstructures on the Corrosion Behavior of Reinforcing Bars (Rebar) Embedded in Concrete
    Prvan Kumar Katiyar
    Prasanna Kumar Behera
    Sudhir Misra
    K. Mondal
    Metals and Materials International, 2019, 25 : 1209 - 1226
  • [25] Effect of high rebar temperature during casting on corrosion in carbonated concrete
    Chen, Lijie
    Su, Ray Kai Leung
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 249
  • [26] Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete
    Karakurt, Cenk
    Topcu, Ilker Bekir
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 35 : 906 - 911
  • [27] Effect of corrosion pit distribution of rebar on pore, and crack characteristics in concrete
    Taheri-Shakib, Jaber
    Al-Mayah, Adil
    CEMENT & CONCRETE COMPOSITES, 2024, 148
  • [28] Effect of rebar coating on corrosion resistance and bond strength of reinforced concrete
    Cheng, A
    Huang, R
    Wu, JK
    Chen, CH
    CONSTRUCTION AND BUILDING MATERIALS, 2005, 19 (05) : 404 - 412
  • [29] Effect of rebar corrosion in concrete on interaction zone under tensile load
    Kunawisarut, A.
    Iwanami, M.
    Chijiwa, N.
    Nakayama, K.
    BRIDGE MAINTENANCE, SAFETY, MANAGEMENT, LIFE-CYCLE SUSTAINABILITY AND INNOVATIONS, 2021, : 2068 - 2074
  • [30] STUDY ON REBAR CORROSION AFTER CARBONATION FOR CONCRETE WITH HIGH CONTENT OF ADMIXTURE
    Sakai M.
    Koshiro Y.
    Kobayashi T.
    Kanematsu M.
    AIJ Journal of Technology and Design, 2024, 30 (75) : 595 - 598