Effect of Burnishing Tool Diameter and Coolant Strategies on Burnishing Performance

被引：3

作者：

Rachmat, Haris ^{[1
,2
]}

Abd Rahim, Erween ^{[1
]}

Mohid, Zazuli ^{[1
]}

Mahalil, Khairuddin ^{[3
]}

Kasah, Amirun Akmal Kasah Feisal ^{[1
]}

Nadzri, Azamuddin ^{[1
]}

机构：

[1] Univ Tun Hussein Onn Malaysia, Fac Mech & Mfg Engn, Precis Machining Res Ctr, Johor Baharu, Malaysia

[2] Telkom Univ, Fak Rekayasa Ind, Bandung, Indonesia

[3] SIRIM Berhad, RASA Ind Estate, Hulu Selangor, Selangor, Malaysia

来源：

INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018) | 2019年 / 1150卷

关键词：

D O I：

10.1088/1742-6596/1150/1/012070

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A burnishing process is employed to improve the surface integrity of the component, especially for aerospace, medical, and nuclear industries. It requires proper cooling and lubricating techniques, usually flood cooling technique. However, this technique is harmful to the working environment. Therefore, this study introduces the application of minimal quantity lubrication (MQL) and cryogenic cooling using CO2 gas. Two burnishing tools made from carbide with a diameter of 10 mm and 16 mm were used to burnish a SS400 carbon steel. Dry burnishing condition is employed and its performance is compared with MQL and supercritical CO2+MQL (SCCO2) conditions. The result shows that the SCCO2+MQL outperformed dry and MQL in terms of burnishing force, temperature and surface roughness.

引用

页数：7

共 50 条

[21] DEEP-HOLE BURNISHING TOOL
BRASLAVSKII, VM
TOPYCHANOV, VV
SOVIET ENGINEERING RESEARCH, 1981, 1 (05): : 93 - 94
[22] A DISK TOOL FOR BURNISHING WORM THREADS
SOGOYAN, MT
SOVIET ENGINEERING RESEARCH, 1987, 7 (02): : 47 - 48
[23] Effect of a combined machining/burnishing tool on the roughness and mechanical properties
Mezlini, S.
Mzali, S.
Sghaier, S.
Braham, C.
Kapsa, Ph.
LUBRICATION SCIENCE, 2014, 26 (03) : 175 - 187
[24] Effect of burnishing parameters on surface microhardness in the burnishing of non-ferrous metals
Luo, HY
Liu, JY
Wang, LJ
Zhong, QP
PROGRESS OF MACHINING TECHNOLOGY, 2004, : 693 - 698
[25] Ball burnishing tool with corrective mechanism of tool position
Abu Shreehah, Tareq A.
Al Qawabah, Safwan M.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2009, 3 (04) : 374 - 385
[26] A Compact Ultrasonic Burnishing System for High Precision Planar Burnishing: Design and Performance Evaluation
Du, Pengfei
Liu, Yingxiang
Deng, Jie
Yu, Hongpeng
Chen, Weishan
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (08) : 8201 - 8211
[27] Ball-Burnishing and Roller-Burnishing to Improve Fatigue Performance of Structural Alloys
Wagner, Lothar
Ludian, Tomasz
Wollmann, Manfred
ENGINEERING AGAINST FRACTURE, 2009, : 1 - 11
[28] Burnishing tool puts a shine on fatigue strength
不详
PROFESSIONAL ENGINEERING, 1999, 12 (06) : 48 - 48
[29] A critical review of tool design in burnishing process
Raza, Ahmed
Kumar, Sudhanshu
TRIBOLOGY INTERNATIONAL, 2022, 174
[30] SURFACE FINISH AFTER BURNISHING WITH A TOROIDAL TOOL
AGAEV, NM
SOVIET ENGINEERING RESEARCH, 1982, 2 (07): : 82 - 83

← 1 2 3 4 5 →