Magnetic, electric properties and hardness of 17-4 PH stainless steel fabricated by selective laser melting

被引：4
|
作者：
Stashkov, A. [1 ]
Schapova, E. [1 ]
Tsar'kova, T. [1 ]
Sazhina, E. [1 ]
Bychenok, V. [2 ]
Fedorov, A. [3 ]
Kaigorodov, A. [4 ]
Ezhov, I. [1 ]
机构：
[1] Russian Acad Sci, Ural Branch, MN Miheev Inst Met Phys, Ekaterinburg, Russia
[2] Estab Sci Engn & Design Ctr Supporting Operat Spa, St Petersburg, Russia
[3] ITMO Univ, St Petersburg, Russia
[4] Russian Acad Sci, Ural Branch, Inst Electrophys, Ekaterinburg, Russia
来源：
VII EURO-ASIAN SYMPOSIUM TRENDS IN MAGNETISM | 2019年 / 1389卷
关键词：
D O I：
10.1088/1742-6596/1389/1/012124
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This research examines 17-4 PH stainless steel (SS) samples fabricated by selective laser melting (SLM). The samples were built in vertical direction, and it was necessary to load powder three times. This made the process suspended and led to the changes in temperature conditions. Despite a continuity of the samples, the samples were divided into three parts shared by visible interfaces. The samples were examined by optical microscopy and X-ray diffraction (XRD) analysis. The XRD data showed variations in phase compositions over the samples height. Magnetic and electric properties, hardness and microhardness of the samples in each parts were determined before and after the heat treatment (650 degrees C for 1 hour, cooling in a furnace). Obtained results show an inhomogeneity of properties over the samples height, but heat treatment led these properties to be uniformly distributed.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] PROCESSING AND PROPERTIES OF HIGHLY POROUS 17-4 PH STAINLESS STEEL
    Mutlu, I.
    Oktay, E.
    POWDER METALLURGY AND METAL CERAMICS, 2011, 50 (1-2) : 73 - 82
  • [32] Tensile Mechanical Behavior and Spall Response of a Selective Laser Melted 17-4 PH Stainless Steel
    Xiaofeng Wang
    Gang Wang
    Tongya Shi
    Yonggang Wang
    Metallurgical and Materials Transactions A, 2021, 52 : 2369 - 2388
  • [33] Tensile Mechanical Behavior and Spall Response of a Selective Laser Melted 17-4 PH Stainless Steel
    Wang, Xiaofeng
    Wang, Gang
    Shi, Tongya
    Wang, Yonggang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (06): : 2369 - 2388
  • [34] Strain rate sensitivity and mechanical anisotropy of selective laser melted 17-4 PH stainless steel
    Lebrun, Tyler
    Tanigaki, Kenichi
    Horikawa, Keitaro
    Kobayashi, Hidetoshi
    MECHANICAL ENGINEERING JOURNAL, 2014, 1 (05):
  • [35] Aging reactions in a 17-4 PH stainless steel
    Hsiao, CN
    Chiou, CS
    Yang, JR
    MATERIALS CHEMISTRY AND PHYSICS, 2002, 74 (02) : 134 - 142
  • [36] Embrittlement of laser surface-annealed 17-4 PH stainless steel
    Tsay, LW
    Yang, TY
    Young, MC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 311 (1-2): : 64 - 73
  • [37] Electrochemical stability of laser shock peened 17-4 PH stainless steel
    Karthik, D.
    Swaroop, S.
    OPTICS AND LASER TECHNOLOGY, 2019, 120
  • [38] Aging kinetics of 17-4 PH stainless steel
    Mirzadeh, H.
    Najafizadeh, A.
    MATERIALS CHEMISTRY AND PHYSICS, 2009, 116 (01) : 119 - 124
  • [39] Hydrogen susceptibility of 17-4 PH stainless steel
    Chiang, WC
    Pu, CC
    Yu, BL
    Wu, JK
    MATERIALS LETTERS, 2003, 57 (16-17) : 2485 - 2488
  • [40] Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion
    Sarker, Dyuti
    Ali, Usman
    Ahmed, Farid
    Esmaeilizadeh, Reza
    Keshavarzkermani, Ali
    Marzbanrad, Ehsan
    Toyserkani, Ehsan
    TMS 2021 150TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2021, : 131 - 141
12345