Effect of graphite particles on machinability of SiC/Gr/Al composites

被引：4
|
作者：
Leng, J. F. [1 ,2 ]
Xing, Z. H. [1 ]
Huo, D. J. [1 ]
Zhou, G. R. [1 ]
Yuan, Z. [1 ]
机构：
[1] Univ Jinan, Sch Mat Sci & Engn, Jinan, Shandong, Peoples R China
[2] Shandong Prov Key Lab Preparat & Measurement Bldg, Jinan, Shandong, Peoples R China
来源：
MATERIALS RESEARCH INNOVATIONS | 2015年 / 19卷
基金：
中国国家自然科学基金;
关键词：
Metal matrix composites; Graphite; Machinability; Adhesive wear; METAL-MATRIX COMPOSITES; TOOL WEAR; MECHANICAL-PROPERTIES; PARAMETERS;
D O I：
10.1179/1432891715Z.0000000001532
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
SiC/Gr/Al composites with the graphite particle size of 1, 6 and 20 mm were fabricated by squeeze casting technology and the effects of graphite particles on machinability were investigated. Results show that with increasing size of graphite particles, the tool wear has very little change, but the cutting force decrease noticeably. Compared to SiC/Al composite, the cutting forces increase steadily with increasing the cutting speed during machining SiC/Gr/Al composite, the tool life is prolonged 42 and 59%, respectively, at speed of 20 and 30 m min(-1) when machining SiC/Gr(6 mu m)/Al composite. It is a result of the solid lubrication of graphite particle preventing for growth of adhesive wear.
引用
收藏
页码：S138 / S141
页数：4
相关论文
共 50 条
  • [41] Fabrication of SiC-Particles-Shielded Al Spheres upon Recycling Al/SiC Composites
    Madarasz, D.
    Budai, I.
    Kaptay, G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (06): : 1439 - 1443
  • [42] Fabrication of SiC-Particles-Shielded Al Spheres upon Recycling Al/SiC Composites
    D. Madarasz
    I. Budai
    G. Kaptay
    Metallurgical and Materials Transactions A, 2011, 42 : 1439 - 1443
  • [43] An investigation on the machinability of Al-SiC metal matrix composites using pcd inserts
    N. Muthukrishnan
    M. Murugan
    K. Prahlada Rao
    The International Journal of Advanced Manufacturing Technology, 2008, 38 : 447 - 454
  • [44] An investigation on the machinability of Al-SiC metal matrix composites using pcd inserts
    Muthukrishnan, N.
    Murugan, M.
    Rao, K. Prahlada
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (5-6): : 447 - 454
  • [45] Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology
    Leng, Jinfeng
    Wu, Gaohui
    Zhou, Qingbo
    Dou, Zuoyong
    Huang, XiaoLi
    SCRIPTA MATERIALIA, 2008, 59 (06) : 619 - 622
  • [46] Effect of Chromium Precipitation on Machinability of Sintered Brass Alloys Dispersed with Graphite Particles
    Imai, Hisashi
    Li, Shufeng
    Kondoh, Katsuyoshi
    Kosaka, Yoshiharu
    Kojima, Akimichi
    Atsumi, Haruhiko
    Umeda, Junko
    MATERIALS TRANSACTIONS, 2011, 52 (07) : 1426 - 1430
  • [47] Effect of chromium precipitation on machinability of sintered brass alloys dispersed with graphite particles
    Joining and Welding Research Institute, Ibaraki 567-0047, Japan
    不详
    Mater. Trans., 7 (1426-1430):
  • [48] Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites
    宋旼
    Transactions of Nonferrous Metals Society of China, 2009, 19 (06) : 1400 - 1404
  • [49] Effect of spatial distribution of SiC particles on the tensile deformation behavior of Al-10vol%SiC composites
    Zhang, Di
    Sugio, Kenjiro
    Sakai, Kazuyuki
    Fukushima, Hiroshi
    Yanagisawa, Sainu
    MATERIALS TRANSACTIONS, 2007, 48 (02) : 171 - 177
  • [50] Effect of spatial distribution of SiC particles on the tensile deformation behavior of Al-10vol%SiC composites
    Mechanical System Engineering, Graduate School of Engineering, Hiroshima University, Higashi-Hiroshima 739-8527, Japan
    不详
    1600, 171-177 (February 2007):
12345