The interest of using biochar, the solid byproduct from organic waste pyrolysis, as soil conditioner is significantly increasing. Nevertheless, persistent organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs), are formed during pyrolysis due to the incomplete combustion of organic matter. Consequently, these pollutants may enter the environment when biochar is incorporated into soil and cause adverse ecological effects. In this study, we examined the content of the 16 United States Environmental Protection Agency (USEPA) PAHs in biochars produced from rice husk, wood, wheat and sewage sludge residues using three different pyrolytic reactors and temperatures (400, 500 and 600 degrees C). The total concentration of PAHs (Sigma PAH) ranged from 799 to 6364 mu g kg(-1), being naphthalene, phenanthrene and anthracene the most abundant PAHs in all the biochars. The maximum amount of PAHs was observed for the rice husk biochar produced in the batch reactor at 400 degrees C, which decreased with increasing temperature. The Sigma PAH value of the wood biochar produced via traditional kilns doubled compared with the wood biochar produced using the other pyrolytic reactors (5330 mu g kg(-1) in Kiln; 2737 mu g kg(-1) in batch and 1942 mu g kg(-1 )in the rotary reactor). Looking for a more reliable risk assessment of the potential exposure of PAHs in biochar, the total toxic equivalent concentrations (TTEC) of the 14 produced biochars were calculated. When comparing the same feedstock and temperature, TTEC values indicated that the rotary reactor produced the safest biochars. In contrast, the biochars produced using the batch reactor at 400 and 500 degrees C have the greatest hazard potential. Our results provide valuable information on the potential risk of biochar application for human and animal health, as well as for the environment due to PAHs contamination. (C) 2019 Elsevier B.V. All rights reserved.