Effects of environment and stress concentration factor on Ti-6Al-4V specimens subjected to quasi-static loading

被引：9
|
作者：
Baragetti, S. [1 ,2 ]
Borzini, E. [3 ]
Arcieri, E. V. [1 ,2 ]
机构：
[1] Univ Bergamo, GITT Ctr Innovat Management & Technol Transfer, Via Salvecchio 19, I-24129 Bergamo, Italy
[2] Univ Bergamo, Dept Management Informat & Prod Engn, Viale Marconi 5, I-24044 Dalmine, Italy
[3] Via Lagrange 26, I-28100 Novara, Italy
来源：
AIAS 2018 INTERNATIONAL CONFERENCE ON STRESS ANALYSIS | 2018年 / 12卷
关键词：
Ti-6Al-4V; quasi-static loading test; notch sensitivity; aggressive environment; CORROSION-FATIGUE; TI ALLOYS; BEHAVIOR; MICROSTRUCTURE; STRENGTH;
D O I：
10.1016/j.prostr.2018.11.097
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The bimodal titanium alloy Ti-6A1-4V is a well-known high strength-to-mass ratio material in different engineering sectors. Furthermore, the rapid oxidation of the surface protects the base material from the interaction with a wide spectrum of corrosive environments. However, the presence of surface defects and the mechanical loading may compromise the effectiveness of the oxide film. Quasi-static loading tests were carried out on different smooth and notched Ti-6A1-4V specimens in order to analyze the role of environment and stress concentration factor. ED 2018 The Authors. Published by Elsevier B.V.
引用
收藏
页码：173 / 182
页数：10
相关论文
共 50 条
  • [21] The kinetics of static globularization of Ti-6Al-4V
    Stefansson, N.
    Semiatin, S.L.
    Eylon, D.
    2002, Minerals, Metals and Materials Society (33):
  • [22] The kinetics of static globularization of Ti-6Al-4V
    Stefansson, N
    Semiatin, SL
    Eylon, D
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (11): : 3527 - 3534
  • [23] The kinetics of static globularization of Ti-6Al-4V
    N. Stefansson
    S. L. Semiatin
    D. Eylon
    Metallurgical and Materials Transactions A, 2002, 33 : 3527 - 3534
  • [24] Effects of nano-sized α2 (Ti3Al) particles on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy with bimodal microstructure
    Dong-Geun Lee
    Sunghak Lee
    Journal of Materials Science, 2005, 40 : 4077 - 4084
  • [25] Effects of nano-sized α2(Ti3Al) particles on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy with bimodal microstructure
    Lee, DG
    Lee, S
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (15) : 4077 - 4084
  • [26] Pre-fatigue influence on quasi-static tensile properties of Ti-6Al-4V in thin-sheet form
    Lopez, J. Galan
    Verleysen, P.
    De Baere, I.
    Degrieck, J.
    ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, 2010, 6
  • [27] Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting
    Razavi, N.
    Van Hooreweder, B.
    Berto, F.
    ADDITIVE MANUFACTURING, 2020, 36
  • [28] Quasi-static and dynamic compressive properties of Ti-based amorphous alloys modified from conventional Ti-6Al-4V alloy
    Jeon, Changwoo
    Kim, Choongnyun Paul
    Kim, Hyoung Seop
    Lee, Sunghak
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 607 : 197 - 205
  • [29] Quasi-static and high strain rate fracture behaviour of Ti6Al4V
    Verleysen, P.
    Peirs, J.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 108 : 370 - 388
  • [30] Enhanced adhesive performance of Ti-6Al-4V/PEEK interface by loading SPEEK on Ti-6Al-4V plates
    Pan, Lei
    Wang, Menglin
    Hu, Jingling
    Xue, Pengbo
    Guo, Huaxin
    Zhong, Lang
    Yuan, Xiaosa
    Shi, Hanqiao
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2022, 114
12345