Experimental investigation of the effect of skew angle on partially or fully submerged deck scour

被引:2
|
作者
Kocyigit, Musteyde Baduna [1 ]
Kocyigit, Onder [1 ]
Akay, Huseyin [1 ]
Demir, Gulay [1 ]
机构
[1] Gazi Univ, Civil Engn Dept, TR-06570 Ankara, Turkey
关键词
skew angle; river bridges; submerged flow; maximum scour hole depth; CONTRACTION SCOUR; BRIDGES;
D O I
10.1139/cjce-2019-0121
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents the results of an experimental study investigating the effect of skew angle on clear-water contraction scour under a bridge deck at partially and fully submerged flow conditions. Two bridge deck models without a pier, one of which was located perpendicular to the flow while the other one was located with skewness of 15 degrees, were used in the study. Forty experiments were performed for each deck model, 24 of which were under partially submerged and 16 were under fully submerged flow conditions. Analysis of the experimental data showed that as the discharge and approach flow depth increased, the maximum scour hole depth under the skewed deck model increased up to 25%-66% for fully submerged flow and 17%-57% for partially submerged flow conditions. Furthermore, the effect of skew angle significantly enlarged the width of the scour hole as you move along the skewed deck.
引用
收藏
页码:1027 / 1036
页数:10
相关论文
共 50 条
  • [41] Experimental Investigation of the Pier Streamlining Effect on Bridge Local Scour under Clear Water Conditions
    Li, Junhong
    Tao, Junliang
    GEOTECHNICAL FRONTIERS 2017: FOUNDATIONS, 2017, (279): : 20 - 28
  • [42] Experimental and numerical investigation of wave induced forces and motions of partially submerged bodies near a fixed structure in irregular waves
    Sayeed, Tanvir
    Colbourne, Bruce
    Molyneux, David
    OCEAN ENGINEERING, 2018, 163 : 451 - 475
  • [43] EXPERIMENTAL INVESTIGATION OF THE EFFECT OF DIE ANGLE ON EXTRUSION PROCESS USING PLASTICINE
    Sharma, M.
    Singh, A. K.
    Singh, P.
    Pathak, K. K.
    Agnihotri, G.
    EXPERIMENTAL TECHNIQUES, 2011, 35 (06) : 38 - 44
  • [44] Experimental investigation of the effect of die angle on extrusion process using plasticine
    M. Sharma
    A. K. Singh
    P. Singh
    K. K. Pathak
    G. Agnihotri
    Experimental Techniques, 2011, 35 : 38 - 44
  • [45] Experimental investigation on effect of stator vane angle adjustment on compressor performance
    Zhang, Jian
    Ren, Minglin
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2000, 15 (01): : 27 - 30
  • [46] An experimental investigation of the effect of the placement angle on the collapse of ice screw anchors
    Bedogni, Vittorio
    Manes, Andrea
    ENGINEERING FAILURE ANALYSIS, 2012, 26 : 139 - 150
  • [47] Experimental Investigation of the Joint Effect of Flow Expansion and Submerged Vanes on Hydraulic Jump Characteristics
    Hadiseh Sedighi-Harsini
    Mahdi Asadi-Aghbolaghi
    Rouhalla Fattahi-Nafchi
    Karim Norouzi
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2022, 46 : 3283 - 3293
  • [48] Experimental Investigation of the Joint Effect of Flow Expansion and Submerged Vanes on Hydraulic Jump Characteristics
    Sedighi-Harsini, Hadiseh
    Asadi-Aghbolaghi, Mahdi
    Fattahi-Nafchi, Rouhalla
    Norouzi, Karim
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2022, 46 (04) : 3283 - 3293
  • [49] An experimental investigation of the effectiveness of partially and fully submerged metal hollow-fins and jute cloth wick-fins on the performance of a dual-basin single-slope solar still
    Modi, Kalpesh V.
    Maurya, Shailendra R.
    Parmar, Jayesh H.
    Kalsariya, Ajay B.
    Panasara, Parth B.
    CLEANER ENGINEERING AND TECHNOLOGY, 2022, 6
  • [50] Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips
    Sharaky, I. A.
    Torres, L.
    Sallam, H. E. M.
    COMPOSITE STRUCTURES, 2015, 122 : 113 - 126