Effect of WEDM Process Parameters on Surface Roughness and Waviness of Inconel 603XL

被引：2
|
作者：
Manikandan, K. [1 ]
Kumar, P. Ranjith [2 ]
Muthukumaran, S. [3 ]
Kumar, B. Suresh [4 ]
机构：
[1] MAM Coll Engn, Dept Mech Engn, Trichy, Tamil Nadu, India
[2] MAM Sch Engn, Dept Mech Engn, Trichy, Tamil Nadu, India
[3] Univ Coll Engn, Dept Mech Engn, Panruti, Tamil Nadu, India
[4] K Ramakrishnan Coll Technol, Dept Mech Engn, Trichy, Tamil Nadu, India
来源：
JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS | 2020年 / 23卷 / 01期
关键词：
WEDM; Inconel; 603; XL; surface roughness; waviness; DFA; MACHINING PARAMETERS; OPTIMIZATION;
D O I：
10.14447/jnmes.v23i1.a06
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Inconel 603 XL alloys are high-temperature superalloys focused on nickel-chromium that are commonly used in aerospace, maritime, nuclear power generation; pharmaceutical, petrochemical, and process industries. In this work, the effect of process parameters of Wire Electrical Discharge Machining (WEDM) on Inconel 603 XL's surface roughness (SR) and waviness (Wa) was studied. The Taguchi analysis and the Desirability Function Analysis (DFA) carried out single objective optimization and multi-objective optimization. From the mean roughness of the surface and the measurement of waviness, pulse on time is among the other variables most important.
引用
收藏
页码：31 / 35
页数：5
相关论文
共 50 条
  • [41] Experimental investigation of the influence of cutting parameters on surface roughness in machining Inconel 718
    Sarkar, B.
    Reddy, M. M.
    Debnath, S.
    AUTOMATIC CONTROL, MECHATRONICS AND INDUSTRIAL ENGINEERING, 2019, : 239 - 244
  • [42] Optimal cutting parameters for desired surface roughness in end milling Inconel 718
    Wang, Yuanwei
    Zhang, Song
    Li, Jianfeng
    Ding, Tongchao
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 911 - 916
  • [43] The influence of working parameters and size effect on surface roughness during EDM process
    Tai, Tzu-Yao
    Lee, Hwa-Teng
    Hsu, Fu-Chuan
    PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 93 - 97
  • [44] Effect of process parameters on surface roughness of NiCu alloy in fluid jet polishing
    Choudhary, Shubham
    Duvedi, Ravinder Kumar
    Saini, Jaswinder Singh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 238 (06) : 2883 - 2893
  • [45] Investigation of the Effect of Process Parameters on Surface Roughness in Wire EDM of Titanium Alloy
    Garg, M. P.
    Jain, Ajai
    Bhushan, Gian
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 78 - +
  • [46] Effect of surface roughness and process parameters on mechanical properties of fabricated medical catheters
    Bovas, B. Clemend
    Karunamoorthy, L.
    Chuan, Foo Boon
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [47] The effect of the process parameters in the planing processes on the surface roughness of cherry and pear woods
    Sogutlu, Cevdet
    Togay, Abdullah
    AFRICAN JOURNAL OF BIOTECHNOLOGY, 2011, 10 (21): : 4392 - 4399
  • [48] Effect of Machining Parameters and Machining Time on Surface Roughness in Dry Turning Process
    Qehaja, Nexhat
    Jakupi, Kaltrine
    Bunjaku, Avdyl
    Bruci, Mirlind
    Osmani, Hysni
    25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 135 - 140
  • [49] Effect of Cutting Parameters to Vibration and Surface Roughness as Application of Process Evaluation in Internal Turning Process
    Luthfi, Muhammad
    Ghozali, Muhamad
    Dionisius, Felix
    Sifa, Agus
    Amat, Mohammad Azwar
    Derajat, Ivandiar
    JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, 2025, 13 (02)
  • [50] Investigation of the Influence of Process Parameters of Wire Electrical Discharge Machining Using Coated Brass on the Surface Roughness of Inconel 718
    Oniszczuk-Swiercz, Dorota
    Swiercz, Rafal
    Nowicki, Rafal
    Kopytowski, Adrian
    Dabrowski, Lucjan
    XIII INTERNATIONAL CONFERENCE ELECTROMACHINING 2018, 2018, 2017
12345