Effect of WEDM Process Parameters on Surface Roughness and Waviness of Inconel 603XL

被引：2
|
作者：
Manikandan, K. [1 ]
Kumar, P. Ranjith [2 ]
Muthukumaran, S. [3 ]
Kumar, B. Suresh [4 ]
机构：
[1] MAM Coll Engn, Dept Mech Engn, Trichy, Tamil Nadu, India
[2] MAM Sch Engn, Dept Mech Engn, Trichy, Tamil Nadu, India
[3] Univ Coll Engn, Dept Mech Engn, Panruti, Tamil Nadu, India
[4] K Ramakrishnan Coll Technol, Dept Mech Engn, Trichy, Tamil Nadu, India
来源：
JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS | 2020年 / 23卷 / 01期
关键词：
WEDM; Inconel; 603; XL; surface roughness; waviness; DFA; MACHINING PARAMETERS; OPTIMIZATION;
D O I：
10.14447/jnmes.v23i1.a06
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Inconel 603 XL alloys are high-temperature superalloys focused on nickel-chromium that are commonly used in aerospace, maritime, nuclear power generation; pharmaceutical, petrochemical, and process industries. In this work, the effect of process parameters of Wire Electrical Discharge Machining (WEDM) on Inconel 603 XL's surface roughness (SR) and waviness (Wa) was studied. The Taguchi analysis and the Desirability Function Analysis (DFA) carried out single objective optimization and multi-objective optimization. From the mean roughness of the surface and the measurement of waviness, pulse on time is among the other variables most important.
引用
收藏
页码：31 / 35
页数：5
相关论文
共 50 条
  • [1] Experimental investigation of effects of cutting parameters on surface roughness in the WEDM process
    Gökler, MI
    Ozanözgü, AM
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (13): : 1831 - 1848
  • [2] Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness
    Ali, Mohammad Yeakub
    Banu, Asfana
    Abu Bakar, Mazilah
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017), 2018, 290
  • [3] Modelling the Kerf Angle, Roughness and Waviness of the Surface of Inconel 718 in an Abrasive Water Jet Cutting Process
    Plodzien, Marcin
    Zylka, Lukasz
    Zak, Krzysztof
    Wojciechowski, Szymon
    MATERIALS, 2023, 16 (15)
  • [4] OPTIMIZATION OF WEDM PARAMETERS FOR SURFACE ROUGHNESS ON HYBRID MMCs
    Satishkumar, D.
    Kanthababu, M.
    ADVANCED COMPOSITES LETTERS, 2014, 23 (03) : 65 - 27
  • [5] Modeling and experimental investigation of process parameters in WEDM for surface roughness using regression model
    Muniappan, A.
    Senthilkumar, R.
    Jayakumar, V.
    Ravikumar, S. Venkata
    Tarunkumar, P. Sai
    3RD INTERNATIONAL CONFERENCE ON DESIGN, ANALYSIS, MANUFACTURING AND SIMULATION (ICDAMS 2018), 2018, 172
  • [6] Optimization of WEDM parameters for surface roughness on hybrid MMCs
    Satishkumar, D. (kb@annauniv.edu), 1600, Adcotec Ltd. (23):
  • [7] Modeling of Process Parameters for Surface Roughness and Analysis of Machined Surface in WEDM of Al/SiC-MMC
    Harmesh Kumar
    Alakesh Manna
    Rajesh Kumar
    Transactions of the Indian Institute of Metals, 2018, 71 : 231 - 244
  • [8] Modeling of Process Parameters for Surface Roughness and Analysis of Machined Surface in WEDM of Al/SiC-MMC
    Kumar, Harmesh
    Manna, Alakesh
    Kumar, Rajesh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (01) : 231 - 244
  • [9] INFLUENCE OF SURFACE WAVINESS AND ROUGHNESS PARAMETERS ON FRICTION AND WEAR.
    Ivanov, Yu.I.
    Nosov, N.V.
    Soviet Journal of Friction and Wear (English translation of Trenie i Iznos), 1987, 8 (04): : 128 - 131
  • [10] Influence of machining parameters on surface roughness in finish cut of WEDM
    Han, Fuzhu
    Jiang, Jun
    Yu, Dingwen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 34 (5-6): : 538 - 546
12345