Green Design of Novel Metal Matrix Composites

被引：0
|
作者：
Singh, R. [1 ]
Singh, N. [1 ]
Farina, I [2 ]
Mascolo, I [3 ]
De Piano, M. [3 ]
Amendola, A. [3 ]
Fraternali, F. [3 ]
机构：
[1] Guru Nanak Dev Engn Coll, Dept Prod Engn, Ludhiana, Punjab, India
[2] Univ Naples Pathenope, Naples, Italy
[3] Univ Salerno, Dept Civil Engn, Salerno, Italy
来源：
2018 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, MECHANICS AND STRUCTURAL ENGINEERING (AMMSE) | 2019年 / 473卷
关键词：
ALTERNATING PENTAMODE LATTICES; NONLINEAR ELASTIC RESPONSE; CEMENT MORTARS; PENALTY MODEL; CLASS-THETA; REINFORCEMENT; OPTIMIZATION; SURFACE; NETWORKS; BEHAVIOR;
D O I：
10.1088/1757-899X/473/1/012008
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present research work investigations have been made for surface hardness of Al-SiC metal matrix composite (MMC) prepared by combining fused deposition modelling (FDM), vacuum moulding(VM) and stir casting process. This combination resulted into novel method for preparation of MMC as green process in single step with significant reduction in time. The input process parameters (namely: SiC particle size, proportion of SiC, vacuum pressure and VM sand grin size) were studied at three levels using Taguchi L9 orthogonal array to find out there effect on surface hardness of casted specimens. Microstructure analysis was conducted to support hardness data.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] METAL MATRIX COMPOSITES
    HARRIS, SJ
    COMPOSITES SCIENCE AND TECHNOLOGY, 1989, 35 (02) : 99 - 103
  • [22] Metal matrix composites
    不详
    AMERICAN CERAMIC SOCIETY BULLETIN, 2005, 84 (06): : 9 - 9
  • [23] Metal Matrix Composites
    Gupta, Manoj
    METALS, 2018, 8 (06)
  • [24] Metal matrix composites
    Hunt, WH
    Herling, DR
    ADVANCED MATERIALS & PROCESSES, 2004, 162 (02): : 39 - 42
  • [25] Novel green composites using zein as matrix and jute fibers as reinforcement
    Reddy, Narendra
    Yang, Yiqi
    BIOMASS & BIOENERGY, 2011, 35 (08): : 3496 - 3503
  • [26] METAL MATRIX COMPOSITES
    STOCKEL, D
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1988, 19 (08) : 261 - 271
  • [27] Die design optimization for axisymmetric hot extrusion of metal matrix composites
    Kim, NH
    Kang, CG
    Kim, BM
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (06) : 1507 - 1520
  • [28] Material Processing and Design of Biodegradable Metal Matrix Composites for Biomedical Applications
    Jingxin Yang
    Jason L. Guo
    Antonios G. Mikos
    Chunyan He
    Guang Cheng
    Annals of Biomedical Engineering, 2018, 46 : 1229 - 1240
  • [29] Design Optimization of Cutting Parameters when Drilling Metal Matrix Composites
    Sriprateep, Keartisak
    Inthidech, Sudsakorn
    Singto, Sarawut
    Patumchat, Puttipong
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 1311 - 1315
  • [30] CREEP AND THERMAL CYCLING FIXTURE DESIGN FOR METAL-MATRIX COMPOSITES
    TAYA, M
    LEE, JK
    LUI, M
    ARMSTRONG, WD
    EXPERIMENTAL MECHANICS, 1995, 35 (01) : 66 - 70
12345