CNC System Based on FPGA for Line Contact Machining

被引：0
|
作者：
Wang, Kunqi [1 ]
Yang, Jingwei [1 ]
Li, Chuancang [1 ]
机构：
[1] Xian Technol Univ, Sch Mechatron Engn, Xian, Peoples R China
来源：
INDUSTRIAL INSTRUMENTATION AND CONTROL SYSTEMS, PTS 1-4 | 2013年 / 241-244卷
关键词：
CNC system; Line contact processing; Composite interpolation; FPGA;
D O I：
10.4028/www.scientific.net/AMM.241-244.1444
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A novel CNC system for line contact machining is put forward to mill ruled surface efficiently. The motion control card based on FPGA is designed in the system for line contact machining. To meet the complex interpolation requirements of CNC system, NC embedded PC structure is used to improve the performance of the CNC system. Computer input and output program by C + + Builder are operated in DLL with WinIO component, to realize the communication between PC and movement control card. Three interpolation modules are simulated in Quartus II. Simulation result shows that linear interpolation, circular interpolation and complex interpolation function are realized on the motion control card based on FPGA, and the line contact machining can be realized in the CNC system efficiently.
引用
收藏
页码：1444 / 1448
页数：5
相关论文
共 50 条
  • [31] A process control system for cryogenic CNC elastomer machining
    Dhokia, V. G.
    Newman, S. T.
    Crabtree, P.
    Ansell, M. P.
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2011, 27 (04) : 779 - 784
  • [32] Development of a computer vision-based system for part referencing in CNC machining centers
    Yachel R. Mileski
    André J. Souza
    Heraldo J. Amorim
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
  • [33] B-Spline fitting of continuous line segments in CNC machining
    Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, China
    不详
    Harbin Gongye Daxue Xuebao, 2008, 10 (1606-1608):
  • [34] Research about Numerical Control Machining of STL Files Based on Fagor CNC system
    Wang, Chao
    Yao, Yuan
    Zhao, QianSheng
    Hu, QingXi
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1597 - 1602
  • [35] An improved FMECA for feed system of CNC machining center based on ICR and DEMATEL method
    Xiaofeng Wang
    Yingzhi Zhang
    Guixiang Shen
    The International Journal of Advanced Manufacturing Technology, 2016, 83 : 43 - 54
  • [36] Construction of Virtual CNC Machining System Based on 3DS and Open GL
    Ni, Junfang
    Fan, Wei
    Duan, Yekuan
    ADVANCES IN MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 220-223 : 414 - 417
  • [37] Development of a computer vision-based system for part referencing in CNC machining centers
    Mileski, Yachel R.
    Souza, Andre J.
    Amorim, Heraldo J.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (06)
  • [38] An improved FMECA for feed system of CNC machining center based on ICR and DEMATEL method
    Wang, Xiaofeng
    Zhang, Yingzhi
    Shen, Guixiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4): : 43 - 54
  • [39] Non-contact Charging System Based on FPGA Controller
    Peng, Bingjie
    Zhou, Yunyao
    Zhang, Jiangliang
    Xiao, Xiong
    Li, Xiaoying
    An, Fangfang
    2011 INTERNATIONAL CONFERENCE ON ENVIRONMENTAL TECHNOLOGY AND MANAGEMENT (ETM 2011), 2011, : 74 - 80
  • [40] A Feedrate-Constraint Method for Continuous Small Line Segments in CNC Machining Based on Nominal Acceleration
    Guo, Peng
    Wang, Ronghua
    Shen, Zhebin
    Zhang, Haorong
    Zhang, Peng
    Lou, Fei
    Li, Hengbo
    Wu, Yijie
    APPLIED SCIENCES-BASEL, 2021, 11 (19):
12345