Effects of Sintering Temperature on the Response of CuFeTe2 Ceramics to Oxygen Gas

被引：0
|
作者：
Kozaki, Masatoshi [1 ]
Tokunaga, Yuta [1 ]
Huang, Yezhi [1 ]
Kuriyaki, Hisao [1 ]
Toko, Kiyoshi [1 ]
机构：
[1] Kyushu Univ, Grad Sch Informat Elect Engn, Nishi Ku, 744 Motooka, Fukuoka 8190395, Japan
来源：
SENSORS AND MATERIALS | 2016年 / 28卷 / 03期
关键词：
oxygen gas sensor; intercalation; layered material; COMPOUND CUFETE2; THIN-FILMS;
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
A new oxygen sensor based on the resistance change caused by oxygen intercalation in the layered compound CuFeTe2 (CFT) was developed. When intercalation occurs, oxygen molecules penetrate into the CFT interlayer, stretching the van der Waals gap and increasing the c -axis resistance. In this study, we prepared ceramic samples from a single crystal using different sintering temperatures. Results show that the sample sintered at 100 degrees C showed the highest oxygen gas response. Moreover we carried out the surface observation of the cross section of each CFT ceramic sample and found that the porosity of the sample increased with decreasing sintering temperature.
引用
收藏
页码：231 / 236
页数：6
相关论文
共 50 条
  • [41] Effects of sintering temperature on structure and properties of BY-PT-PMN ternary piezoelectric ceramics
    Liu Hai
    Zhang Bo-Ping
    Pei Yu
    Zhao Lei
    Wang Kai-sheng
    Liu Yan-tao
    Journal of Materials Research, 2015, 30 : 782 - 790
  • [42] Effects of Sintering Temperature on Open-Volume Defects and Thermoluminescence of Yttria and Lutetia Ceramics
    Chapman, Matthew G.
    Walker, Roger C., II
    Schmitt, Jaclyn M.
    McPherson, Cameron L.
    Ameena, Fnu
    Kucera, Courtney J.
    Quarles, Carroll A.
    DeVol, Timothy A.
    Ballato, John
    Jacobsohn, Luiz G.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (04) : 1449 - 1454
  • [43] Effects of temperature and additives content on SiC ceramics prepared by spark plasma sintering br
    Gao, Ding
    Sun, Shijie
    Jian, Jiao
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2023, 51 (03): : 52 - 58
  • [44] Effects of slag addition and sintering temperature on the technological properties of dolomite based porous ceramics
    Arkame, Youssef
    Harrati, Achraf
    Jannaoui, Mohamed
    Et-Tayea, Yassine
    Yamari, Imane
    Sdiri, Ali
    Sadik, Chaouki
    OPEN CERAMICS, 2023, 13
  • [45] Effects of sintering temperature and doped Al content on the microstructure and physical performances of AZO ceramics
    Chen, Yiyi
    Li, Zhaoyang
    Lei, Jinkun
    Li, Jiwen
    Wang, Nannan
    Xiong, Mei
    VACUUM, 2022, 205
  • [46] Effects of sintering temperature on pore characterization and strength of porous corundum-mullite ceramics
    Yan, Wen
    Li, Nan
    Han, Bingqiang
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (03): : 388 - 391
  • [47] Effects of Sintering Temperature on Properties of Green Porous Mullite Ceramics Fabricated by Insulators Waste
    Li, Shujing
    Xu, Nana
    Duan, Binwen
    Li, Yuanbing
    Li, Guijuan
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2016, 75 (02) : 98 - 101
  • [48] In Vivo Evaluation of the Effects of Sintering Temperature on the Optical Properties of Dental Glass-Ceramics
    Fan, Kuo-Cheng
    Lin, Yu-Ling
    Tsao, Hao-Wei
    Chen, Hsuan
    Lee, Sheng-Yang
    Cheng, Yu-Chen
    Huang, Hsiao-Ping
    Lin, Wei-Chun
    NANOMATERIALS, 2022, 12 (13)
  • [49] Effects of sintering temperature on structure and properties of BY-PT-PMN ternary piezoelectric ceramics
    Liu Hai
    Zhang Bo-ping
    Pei Yu
    Lei, Zhao
    Wang Kai-sheng
    Liu Yan-tao
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (06) : 782 - 790
  • [50] Effects of sintering additives on preparation of CaF2 transparent ceramics
    Zhi Guanglin
    Mei Bingchu
    Zhou Weibing
    Song Jinghong
    Li Weiwei
    Zhang Yan
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2011, 26 (06): : 1179 - 1183
12345