Characterization of a polyimide-coated humidity sensor in a hybrid fibre grating configuration

被引:1
|
作者
Alwis, Lourdes [1 ]
Sun, Tong [2 ]
Grattan, Kenneth T. V. [2 ,3 ]
机构
[1] Edinburgh Napier Univ, Sch Engn & Built Environm, Edinburgh, Midlothian, Scotland
[2] City Univ London, Sch Engn & Math Sci, London EC1V 0HB, England
[3] City Univ London, City Grad Sch, London EC1V 0HB, England
关键词
Fibre Bragg Grating (FBG); Long Period Grating (LPG); Hybrid Sensor (HS); Relative Humidity (RH);
D O I
10.1117/12.2193678
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
A Relative Humidity (RH) sensor incorporating a Long Period Grating (LPG) and a Fibre Bragg Grating (FBG) in a series configuration was developed and evaluated. The LPG was coated with polyimide allowing it to respond to humidity changes while the FBG is used for temperature compensation. The hybrid sensor was then tested over the change in RH from 20-95 % and temperature of 20-80 degrees C. The sensitivity of the hybrid sensor to temperature and RH were determined to be 9 pm/degrees C and 0.23 nm/% RH, with negligible hysteresis (<1% RH), showing the value of the dual LPG/FBG approach to optimize sensitivity.
引用
收藏
页数:4
相关论文
共 50 条
  • [21] Polyimide coated Fabry-Perot humidity sensor
    Janssens, Stefaan
    Swanson, Adam
    Raymond, Sebastiampillai
    2019 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC), 2019, : 646 - 649
  • [22] A humidity fiber sensor based on both end-sides of a fiber Bragg grating coated with polyimide
    Xie, Zhanwu
    Yan, Haitao
    Li, Yanfei
    Zhao, Xiaoyan
    OPTICAL FIBER TECHNOLOGY, 2020, 57
  • [23] Fiber Bragg Grating Humidity Sensor Based on Polyimide Material
    Xing Xinkui
    Jiang Xue
    Liu Fanfan
    Kuang Kabin
    Qin Heying
    LASER & OPTOELECTRONICS PROGRESS, 2022, 59 (13)
  • [24] Humidity characteristics of a weak fiber Bragg grating array coated with polyimide
    Wang, Kang
    Guo, Huiyong
    Zhou, Ciming
    Zheng, Bolun
    Xu, Ting
    Fan, Dian
    OPTICAL FIBER TECHNOLOGY, 2023, 77
  • [25] Investigation of polyimide coated fibre Bragg gratings for relative humidity sensing
    Swanson, A. J.
    Raymond, S. G.
    Janssens, S.
    Breukers, R. D.
    Bhuiyan, M. D. H.
    Lovell-Smith, J. W.
    Waterland, M. R.
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2015, 26 (12)
  • [26] Forward Brillouin scattering acoustic impedance sensor using thin polyimide-coated fiber
    Chow, Desmond M.
    Thevenaz, Luc
    OPTICS LETTERS, 2018, 43 (21) : 5467 - 5470
  • [27] Relative Humidity Sensing Based on Passively Mode-Locked Fiber Laser With Polyimide-Coated Fiber
    Ma, Shaonian
    Pang, Yuxi
    Ji, Qiang
    Zhao, Xian
    Qin, Zengguang
    Liu, Zhaojun
    Xu, Yanping
    IEEE SENSORS JOURNAL, 2024, 24 (05) : 6257 - 6263
  • [28] Radiation hard polyimide-coated FBG optical sensors for relative humidity monitoring in the CMS experiment at CERN
    Makovec, A.
    Berruti, G.
    Consales, M.
    Giordano, M.
    Petagna, P.
    Buontempo, S.
    Breglio, G.
    Szillasi, Z.
    Beni, N.
    Cusano, A.
    JOURNAL OF INSTRUMENTATION, 2014, 9
  • [29] Temperature-compensated optimized relative humidity and refractive index sensors using a hybrid fibre grating configuration
    Alwis, Lourdes
    Sun, Tong
    Grattan, Kenneth T. V.
    2015 IEEE SENSORS, 2015, : 1367 - 1368
  • [30] Simultaneous measurement of temperature and humidity using a polarimetric fiber laser with polyimide-coated fiber and beat frequency demodulation
    Ma, Shaonian
    Ji, Qiang
    Zhao, Xian
    Qin, Zengguang
    Liu, Zhaojun
    Xu, Yanping
    MEASUREMENT, 2025, 246