Theoretical investigation of friction at die/billet interface in hydrostatic extrusion of commercially pure aluminum

被引：0
|
作者：
Tomar, Pankaj [1 ]
机构：
[1] IGDT Univ Women, MAE Dept, Delhi 110403, India
来源：
3RD INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING 2016, ICIAME 2016 | 2016年 / 23卷
关键词：
Extrusion pressure; viscous heating; semi-die angle; Tresca friction factor; reynolds equation; HYDRODYNAMIC LUBRICATION;
D O I：
10.1016/j.protcy.2016.03.033
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The investigation of friction at the die billet interface in hydrostatic extrusion process is vital issue as it is affected by various operating conditions. In presence of pressurized lubricant chamber or hydrostatic extrusion pressure a lubricant film is formed at the interfacial contact in hydrostatic extrusion process. Existence of lubricating film at the interfacial contact drastically reduces friction and its optimization is needful as thick lubricating film produces unconstrained deformation on the billet surface and thin lubricating film enhances friction on the interfacial contact. Therefore, the purpose of this paper is to carry out theoretical investigation of friction at die/billet interface in hydrostatic extrusion process of commercially pure aluminum under various operating parameters using a Roelands' viscosity model. The Tresca's friction factors at the interfacial contact of die/billet increases on increase of semi-die angle of die and decreases on increase of extrusion pressure due to more favourable lubrication conditions. (C) 2016 Elsevier Ltd.
引用
收藏
页码：319 / 327
页数：9
相关论文
共 50 条
  • [21] REDUNDANT WORK AND FRICTION IN HYDROSTATIC EXTRUSION OF PURE ALUMINIUM AND AN ALUM2NIUM ALLOY
    PUGH, HLD
    JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1964, 6 (04): : 362 - &
  • [22] Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
    Sadeghi-Ghogheri, M.
    Kasiri-Asgarani, M.
    Amini, K.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2016, 54 (01): : 71 - 75
  • [23] Theoretical and experimental investigation of gas metal arc weld pool in commercially pure aluminum:Effect of welding current on geometry
    Farzadi A
    Morakabiyan Esfahani M
    Alavi Zaree S R
    JournalofCentralSouthUniversity, 2017, 24 (11) : 2556 - 2564
  • [24] Theoretical and experimental investigation of gas metal arc weld pool in commercially pure aluminum: Effect of welding current on geometry
    Farzadi, A.
    Esfahani, Morakabiyan M.
    Zaree, Alavi S. R.
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2017, 24 (11) : 2556 - 2564
  • [25] Experimental and numerical analysis of the friction condition in the die bearing during aluminum extrusion
    Mueller, S.
    Muehlhause, J.
    Maier, J.
    Hora, P.
    PROGRESS IN EXTRUSION TECHNOLOGY AND SIMULATION OF LIGHT METAL ALLOYS, 2012, 491 : 113 - +
  • [26] Theoretical and experimental investigation of gas metal arc weld pool in commercially pure aluminum: Effect of welding current on geometry
    A. Farzadi
    M. Morakabiyan Esfahani
    S. R. Alavi Zaree
    Journal of Central South University, 2017, 24 : 2556 - 2564
  • [27] Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations
    Suwas, Satyam
    Massion, R. Arruffat
    Toth, L. S.
    Fundenberger, J. -J.
    Beausir, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 520 (1-2): : 134 - 146
  • [28] Microstructural and mechanical properties of commercially pure aluminum subjected to Dual Equal Channel Lateral Extrusion
    Talebanpour, B.
    Ebrahimi, R.
    Janghorban, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 141 - 145
  • [29] Finite element simulation of die design for Equal Channel Angular Extrusion process of pure Aluminum and its experimental investigation
    Xu, Shubo
    Jing, Cainian
    GuochengRen
    Zhao, Guoqun
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1737 - 1740
  • [30] A Comparative Study of Commercially Pure Aluminum Processed by ECAP Using Conventional and New Die
    Surendarnath, S.
    Sankaranarayanasamy, K.
    Ravisankar, B.
    MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (10) : 1172 - 1178
12345