3D Study of Heat Transfer Based On PVT/PCM System

被引：6
|
作者：
Ashikuzzaman, M. [1 ]
Nasrin, R. [1 ]
Zohora, F. T. [1 ,2 ]
Hossain, M. Saddam [1 ]
机构：
[1] Bangladesh Univ Engn & Technol, Dept Math, Dhaka 1000, Bangladesh
[2] Daffodil Int Univ, Dept Gen Educ Dev, Dhaka 1207, Bangladesh
来源：
8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING | 2019年 / 2121卷
关键词：
PHASE-CHANGE MATERIALS; SOLAR COLLECTOR; COOLING SYSTEM; PERFORMANCE; ENERGY; EFFICIENCY;
D O I：
10.1063/1.5115944
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Electrical power as well as thermal energy are converted from solar radiation in a photovoltaic thermal (PVT) system. At a fixed temperature, thermal energy is absorbed by phase change materials (PCM) in terms of latent heat. PCM has storage ability of latent heat. The heat is stored in PVT/PCM system and used latterly as an ultimate application. For PVT/PCM system heat removal procedure is concurrent due to the dependence of its charging and discharging on ambient. In this research, a 3D mathematical model of PVT/PCM system has been solved numerically using finite element method. Results have been shown in terms of surface temperature and streamline pattern of PVT/PCM system with time variation. The values of average temperature of solar cell, electrical power, heat energy, electrical-thermal efficiency and overall efficiency have been found. It is observed that using PCM in the PVT module the temperature of solar cell reduces and consequently the output power and efficiency enhance.
引用
收藏
页数：9
相关论文
共 50 条
  • [21] A review on heat transfer enhancement techniques for PCM based thermal energy storage system
    Choure, Bhim Kumar
    Alam, Tanweer
    Kumar, Rakesh
    JOURNAL OF ENERGY STORAGE, 2023, 72
  • [22] 3D wireless power transfer based on 3D printed electronics
    Hou, Tao
    Song, Yu
    Elkhuizen, Willemijn S.
    Jiang, Jiehui
    Geraedts, Jo M. P.
    2018 IEEE 14TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), 2018, : 499 - 505
  • [23] Reconstruction and fast prediction of 3D heat and mass transfer based on a variational autoencoder
    Liu, Gongyan
    Li, Runze
    Zhou, Xiaozhou
    Sun, Tianrui
    Zhang, Yufei
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2023, 149
  • [24] Thermionic enhanced heat transfer in electronic devices based on 3D Dirac materials
    Huang, Sunchao
    Lewis, R. A.
    Zhang, Chao
    JOURNAL OF APPLIED PHYSICS, 2019, 126 (16)
  • [25] Modeling and Simulation of Human Body Heat Transfer System Based on Air Space Values in 3D Clothing Model
    Mosleh, Sara
    Abtew, Mulat Alubel
    Bruniaux, Pascal
    Tartare, Guillaume
    Loghin, Emil-Constantin
    Dulgheriu, Ionut
    MATERIALS, 2021, 14 (21)
  • [26] New approach to study the heat transfer in internal combustion engines by 3D modelling
    Broatch, A.
    Olmeda, P.
    Margot, X.
    Escalona, J.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 138 : 405 - 415
  • [27] Numerical Study on 3D Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling
    Nie, Tao
    Liu, Weiqiang
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 1057 - 1061
  • [28] A 3D numerical study of fluid flow and heat transfer in a single screw extruder
    Kwag, DS
    Lyu, MY
    Kim, WS
    INTERNATIONAL POLYMER PROCESSING, 2002, 17 (02) : 95 - 101
  • [29] 3D numerical study of heat and mass transfer of moving porous moist objects
    Coban, Seda Ozcan
    Selimefendigil, Fatih
    Oztop, Hakan F.
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2021, 24
  • [30] Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe
    Zhang, Chunwei
    Yu, Meng
    Fan, Yubin
    Zhang, Xuejun
    Zhao, Yang
    Qiu, Limin
    ENERGY, 2020, 195
12345