Mode-filtering technique based on all-fiber-based external cavity for fiber-based optical frequency comb

We developed a mode-filtering technique based on the all-fiber-based external cavity for a fiber-based optical frequency comb for high repetition rate (f(rep)) frequency comb, and the carrier envelope offset frequency (f(ceo)) can be detected and stabilized and is robust to environmental fluctuations. To achieve multiplication of the f(rep) with a high multiplication factor using the fiber ring cavity, a long fiber was developed to mitigate the physical limitation inhibiting the shortening of the cavity length. In this study, the length of the fiber cavity was set to 6.7 m (free spectral range = 44.7 MHz) as the fiber-based comb length was 6.1 m. We were able to demonstrate a multiplication factor of 11, i.e., f(rep) increased from 48.7 MHz to 536.0 MHz with a side mode suppression ratio of about 25 dB using the double-pass configuration. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement