Influence of silver on structural, electrical, mechanical and soldering properties of tin-indium based alloys

被引:8
|
作者
El-Bediwi, AB [1 ]
El-Behay, MM
机构
[1] Mansoura Univ, Fac Sci, Dept Phys, Met Phys Lab, Mansoura, Egypt
[2] Al Azhar Univ, Fac Sci, Dept Phys, Girls Branch, Cairo, Egypt
来源
RADIATION EFFECTS AND DEFECTS IN SOLIDS | 2004年 / 159卷 / 02期
关键词
electrical; elastic modulus; lead-free solder; wettability; melting point;
D O I
10.1080/10420150410001670288
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
Structure, electrical resistivity, wettability, melting point, internal friction and elastic moduli of the Sn50In50, Sn77.2In20Ag2.8, Sn72.5In25Ag2.5 and Sn95Ag5 rapidly solidified lead-free solder alloys have been investigated. The Sn50In50 alloy has better properties such as low strength, melting point, electrical resistivity and adequate wetting for low-temperature solder applications (precious metals) and bearing solder when soldering to gold substrate. In addition, it has better rework/repair characteristics. The electrical resistivity, internal friction and wetting values decrease by adding silver to tin-indium alloys but the melting temperature and elastic modulus values are increased. The Sn95Ag5 lead-free solder alloy has better properties, such as higher values of melting point and elastic modulus as compared with lead-tin eutectic solder alloy, for high-temperature solder applications.
引用
收藏
页码:133 / 140
页数:8
相关论文
共 50 条
  • [31] INFLUENCE OF THE DEPOSITION AND ANNEAL TEMPERATURE ON THE ELECTRICAL-PROPERTIES OF INDIUM TIN OXIDE
    WEIJTENS, CHL
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1991, 138 (11) : 3432 - 3434
  • [32] Thermodynamic properties of liquid silver-indium-tin alloys determined from emf measurements
    Jendrzejczyk-Handzlik, Dominika
    Gierlotka, Wojciech
    Fitzner, Krzysztof
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2008, 99 (11) : 1213 - 1221
  • [33] Electrical, Optical and Photocatalytic Properties of Silver Nanowires Deposited Indium Tin Oxide Thin Film
    Shin, Keon Yuep
    Kim, Sangmo
    Keum, Min Jong
    Kim, Kyung Hwan
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2017, 17 (10) : 7449 - 7453
  • [34] PROCESSING AND PROPERTIES OF SILVER-TIN OXIDE-INDIUM OXIDE ELECTRICAL CONTACT MATERIALS
    VERMA, A
    ROY, A
    ANANTHARAMAN, TR
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1991, 27 (01): : 51 - 56
  • [35] Thermally induced variations in structural and mechanical properties of rapid solidified Tin-based alloys
    El-Salam, F. Abd
    El-Khalek, A. M. Abd
    Nada, R. H.
    Nagy, M. R.
    El-Haseeb, R. Abd
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 506 (1-2): : 135 - 140
  • [36] Fabrication, electrical and optical properties of silver, indium tin oxide (ITO), and indium zinc oxide (IZO) nanostructure arrays
    Khosroabadi, Akram A.
    Gangopadhyay, Palash
    Binh Duong
    Thomas, Jayan
    Sigdel, Ajaya K.
    Berry, Joseph J.
    Gennett, Thomas
    Peyghambarian, N.
    Norwood, Robert A.
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2013, 210 (05): : 831 - 838
  • [37] Investigation of Electrical, Optical and Structural Properties of Sputtered Indium Tin Oxide Thin Film
    Hasan, Md Tanvir
    Bhalla, Amar
    Guo, Ruyan
    PHOTONIC FIBER AND CRYSTAL DEVICES: ADVANCES IN MATERIALS AND INNOVATIONS IN DEVICE APPLICATIONS IX, 2015, 9586
  • [38] SURFACE PROPERTIES OF INDIUM-GALLIUM AND INDIUM-TIN ALLOYS
    KONONENKO, VI
    SUKHMAN, AL
    YATSENKO, SP
    RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY, 1972, 46 (06): : 911 - +
  • [39] Electrical and structural properties of indium tin oxide films prepared by pulsed laser deposition
    Izumi, H
    Adurodija, FO
    Kaneyoshi, T
    Ishihara, T
    Yoshioka, H
    Motoyama, M
    JOURNAL OF APPLIED PHYSICS, 2002, 91 (03) : 1213 - 1218
  • [40] SURFACE PROPERTIES OF INDIUM-GALLIUM AND INDIUM-TIN ALLOYS
    KONONENKO, VI
    SUKHMAN, AL
    YATSENKO, SP
    ZHURNAL FIZICHESKOI KHIMII, 1972, 46 (06): : 1589 - +