Drilling of Borosilicate Glass with Feedback Control Based on Cutting Force

被引：4

作者：

Ohzeki, Hiro ^{[1
]}

Arai, Fumihito ^{[2
,3
]}

机构：

[1] Kistler Japan Co Ltd, Ind Div, Minato Ku, 3-20-20 Kaigan, Tokyo 1080022, Japan

[2] Nagoya Univ, Dept Mech Sci & Engn, Chikusa Ku, Nagoya, Aichi 4648601, Japan

[3] Seoul Natl Univ, Seoul, South Korea

来源：

ADVANCES IN ABRASIVE TECHNOLOGY XIV | 2011年 / 325卷

关键词：

drilling; feedback control; cutting force; glass; defect-free machining;

D O I：

10.4028/www.scientific.net/AMR.325.442

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with drilling of borosilicate glass with feedback control based on cutting force, in order to provide a basis for defect-free machining of through-holes on borosilicate-glass plates. In this work a machining system which can be operated at a predetermined cutting force by changing the feed rate based on cutting force measured by a piezoelectric type of cutting dynamometer was developed. Subsequently, drilling tests of borosilicate glass was carried out with the developed system. Based on the results of the drilling tests, It has been confirmed that feedback control based on cutting force has the possibility of defect-free drilling of borosilicate-glass plate under specific conditions.

引用

页码：442 / +

页数：2

共 50 条

[21] Cutting Force Model of Glass Ceramics Based on Response Surface Methodology
Chen Yao
Yu Aibing
Jia Dawei
Zhao Nan
JOURNAL OF RARE EARTHS, 2007, 25 : 337 - 339
[22] Extracting cutting force coefficients from drilling experiments
Hamade, RF
Seif, CY
Ismail, F
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (3-4): : 387 - 396
[23] Cutting Force and Temperature Variation in Bone Drilling - A Review
Turnad, Lenggo Ginta
Bambang, Ariwahjoedi
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 : 934 - 938
[24] Influence of coal body stress on drilling cutting force
Zhao Z.
Qiu D.
Yang K.
Zheng Y.
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2020, 51 (10): : 2941 - 2949
[25] Picosecond laser cutting and drilling of thin flex glass
Wlodarczyk, Krystian L.
Brunton, Adam
Rumsby, Phil
Hand, Duncan P.
OPTICS AND LASERS IN ENGINEERING, 2016, 78 : 64 - 74
[26] Cutting Force Fuzzy Control & Intelligence Measure in Cutting Process Based on HMM
Kang, J.
2015 INTERNATIONAL CONFERENCE ON MECHANICAL SCIENCE AND MECHANICAL DESIGN, MSMD 2015, 2015, : 583 - 589
[27] Bilateral force feedback control based on wideband acceleration control
Katsura, Seiichiro
Irie, Kouhei
Suzuyama, Toshiyuki
Ohishi, Kiyoshi
2007 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS, 2007, : 490 - 495
[28] Feedback Scheme Based on Fuzzy Control for Shear Force Control
Escamilla, Diego V.
Siller, Hector R.
Guedea, Federico
Cortes, Rodolfo
Coello-Cardenas, Victor
2012 IEEE NINTH ELECTRONICS, ROBOTICS AND AUTOMOTIVE MECHANICS CONFERENCE (CERMA 2012), 2012, : 171 - 175
[29] Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites
Mohan, NS
Ramachandra, A
Kulkarni, SM
COMPOSITE STRUCTURES, 2005, 71 (3-4) : 407 - 413
[30] The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
Abrao, A. M.
Rubio, J. C. Campos
Faria, P. E.
Davim, J. P.
MATERIALS & DESIGN, 2008, 29 (02) : 508 - 513

← 1 2 3 4 5 →