THE INFLUENCE OF THE EFFECTIVE PARAMETERS ON THE CHANGES OF EXTERNAL DIAMETER AND HARDNESS IN TUBE SPINNING PROCESS USING DESIGN OF EXPERIMENTS

被引：0

作者：

Nahrkhalaji, A. R. Fazeli ^{[1
]}

Tashnizi, E. Sharifi ^{[1
]}

机构：

[1] KN Toosi Univ Technol, Dept Mech Engn, Tehran, Iran

来源：

PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE ON COMPUTERS AND INDUSTRIAL ENGINEERING, VOLS 1-3 | 2008年

关键词：

Tube spinning; external diameter; hardness; analysis of variance (ANOVA); parametric interactions; regression;

D O I：

暂无

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Tube spinning process is considered to be an effective process for fabricating thin wall cylindrical parts with precision tolerances. In this research, the influence of major parameters of the thermomechanical tube spinning process such as preform thickness, percent of thickness reduction, rotational speed and feed rate, solution and aging treatment on the external diameter and hardness of 2024 aluminum are considered. Results of experimental evaluation are analyzed by variance analysis and a mathematic model for predicting external diameter and hardness is obtained. Finally using this model, input parameters for optimum production are achieved.

引用

页码：312 / 319

页数：8

共 50 条

[31] Studying the influence of process parameters on the catalytic carbon nanofibers formation using factorial design
Jarrah, Nabeel A.
Chemical Engineering Journal, 2009, 151 (1-3): : 367 - 371
[32] The influence of process parameters on the physical characteristics of ceramic microneedles, evaluated using a factorial design
Carracedo-Taboada, M.
O'Sullivan, Kathleen
McAuliffe, M. A. P.
Vucen, S.
O'Sullivan, C.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 153 - 160
[33] Studying the influence of process parameters on the catalytic carbon nanofibers formation using factorial design
Jarrah, Nabeel A.
CHEMICAL ENGINEERING JOURNAL, 2009, 151 (1-3) : 367 - 371
[34] Process parameters investigation of a laser-generated single clad for minimum size using design of experiments
Ermurat, Mehmet
Arslan, Mehmet Ali
Erzincanli, Fehmi
Uzman, Ibrahim
RAPID PROTOTYPING JOURNAL, 2013, 19 (06) : 452 - 462
[35] Optimization of vacuum casting process parameters to enhance tensile strength of components using design of experiments approach
Chil-Chyuan Kuo
Hsueh-An Liu
Chao-Ming Chang
The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3775 - 3785
[36] Optimization of vacuum casting process parameters to enhance tensile strength of components using design of experiments approach
Kuo, Chil-Chyuan
Liu, Hsueh-An
Chang, Chao-Ming
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (9-10): : 3775 - 3785
[37] Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments
Li, JF
Liao, HL
Ding, C
Coddet, C
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 160 (01) : 34 - 42
[38] Thermocatalytic decomposition of methane using activated carbon: Studying the influence of process parameters using factorial design
Abbas, Hazzim F.
Baker, Inas F.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (15) : 8985 - 8993
[39] Investigation of the effective parameters in tube hydroforming process by using experimental and finite element method for manufacturing of tee joint products
Hadi Ahmadi
Mehdi Zohoor
The International Journal of Advanced Manufacturing Technology, 2017, 93 : 393 - 405
[40] Investigation of the effective parameters in tube hydroforming process by using experimental and finite element method for manufacturing of tee joint products
Ahmadi, Hadi
Zohoor, Mehdi
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 393 - 405

← 1 2 3 4 5 →