Status of the European Union Project FASTGRID

High voltage direct current super-grids are one attractive solution for the transmission of bulk power of renewable electricity over long distances. Their protection is still an issue and superconducting fault current limiters (SCFCL) offer attractive perspectives. However, the actual superconducting tapes are not yet properly designed for operation at high voltages (>100 kV): The electric field developed during the current limitation is still too low (approximately 50 V/m for 50 ms) and the limiter requires too long lengths of tape. The European project FASTGRID aims at improving the properties of the REBCO tapes to enhance significantly (by 2-3 times) the electric field limit and so the economical SCFCL attractiveness. We use advanced THEVA tapes. Substantial improvements are also planned on the stabilizer (shunt) layer. Several shunt ways are under investigations. Other improvement on the tape properties will be carried out, namely the increase of the normal zone propagation velocity by at least one order of magnitude, with the help of the innovative current flow diverter architecture. The optimized conductor will be used in a SCFCL module (approximate to 1.5 kA-50 kV) tested at 65 K. We will monitor the temperature along the conductor using an attached optical fibre. FAST-GRID will also develop innovative tapes based on sapphire substrate, which can tolerate very high electric fields, in the range of kilovolts per meter. Validated on the laboratory scale, this game-changing technology needs to be implemented at long lengths with an industrial process. We will provide an overview of the project and its first results.