Nonlinear stress analysis in adhesively bonded single-lap joint

被引：5

作者：

Sayman, Onur ^{[1
]}

Ozel, Adnan ^{[2
]}

Pasinli, Ahmet ^{[3
]}

Ozen, Mustafa ^{[1
]}

机构：

[1] Dokuz Eylul Univ, Dept Mech Engn, Fac Engn, Izmir, Turkey

[2] Ataturk Univ, Dept Mech Engn, Fac Engn, Erzurum, Turkey

[3] Ege Univ, Ege Tech Training High Sch, Izmir, Turkey

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2013年 / 27卷 / 21期

关键词：

elastic-plastic solution; FEM solution; single-lap joint; adhesive joint; PREDICTION; ADHERENDS; REPAIRS;

D O I：

10.1080/01694243.2013.773696

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this investigation, an analytical elastic-plastic solution was proposed for a single-lap joint. A ductile adhesive joint material was used as the bond material. FM-73 was utilized in the study. The influence of the bending moment was neglected in the solution. The solution was modified for shear stresses. The analytical solution was compared with the FEM solution. An ANSYS 10.0 solution was employed in the numerical solution. Both solutions were compared with each other. These two solutions produced close agreements.

引用

页码：2304 / 2314

页数：11

共 50 条

[41] Analysis of an adhesively bonded single lap joint subjected to eccentric loading
Anyfantis, Konstantinos N.
Tsouvalis, Nicholas G.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 41 : 41 - 49
[42] Finite element inversion method for interfacial stress analysis of composite single-lap adhesively bonded joint based on full-field deformation
Bai, Ruixiang
Bao, Shuanghua
Lei, Zhenkun
Yan, Cheng
Han, Xiao
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 81 : 48 - 55
[43] Elastic stresses in an adhesively-bonded functionally-graded tubular single-lap joint in tension
Apalak, M. Kemal
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2006, 20 (09) : 1019 - 1046
[44] Progressive damage modeling of an adhesively bonded unidirectional composite single-lap joint in tension at the mesoscale level
Apalak, Z. Gul
Apalak, M. Kemal
Genc, M. Serdar
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2006, 19 (06) : 671 - 702
[45] Modelling load transfer in single-lap adhesively bonded and hybrid (bolted / bonded) joints
Paroissien, Eric
Lachaud, Frederic
Schwartz, Sebastien
PROGRESS IN AEROSPACE SCIENCES, 2022, 130
[46] Stress analysis of generally asymmetric single lap adhesively bonded joints
Lee, J
Kim, H
JOURNAL OF ADHESION, 2005, 81 (05): : 443 - 472
[47] The effect of viscoelasticity on the stress distribution of adhesively single-lap joint with an internal break in the composite adherends
Arash Reza
Mohammad Shishesaz
Mechanics of Time-Dependent Materials, 2018, 22 : 373 - 399
[48] Stress analysis of generally asymmetric single lap adhesively bonded joints
Lee, Jungmin
Kim, Hyonny
Journal of Adhesion, 2005, 81 (05): : 443 - 472
[49] The effect of viscoelasticity on the stress distribution of adhesively single-lap joint with an internal break in the composite adherends
Reza, Arash
Shishesaz, Mohammad
MECHANICS OF TIME-DEPENDENT MATERIALS, 2018, 22 (03) : 373 - 399
[50] Analytical Solutions of Stress Field in Adhesively Bonded Composite Single-lap Joints under Mechanical Loadings
Selahi, E.
Tahani, M.
Yousefsani, S. A.
INTERNATIONAL JOURNAL OF ENGINEERING, 2014, 27 (03): : 475 - 486

← 1 2 3 4 5 →