Effect of niobium on microstructure of cast AISI H13 hot work tool steel

被引：62
|
作者：
Kheirandish, Shahram [1 ]
Noorian, Ahmad [1 ]
机构：
[1] Iran Univ Sci & Technol, Dept Mat Sci & Met Engn, Tehran 1684613114, Iran
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2008年 / 15卷 / 04期
关键词：
hot work tool steel; H13; niobium; NbC; microstructure;
D O I：
10.1016/S1006-706X(08)60145-4
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of niobium addition on the microstructure of cast AISI H13 hot work tool steel was evaluated by using EDX analyzer attached to the scanning electron microscope. The volume percent of eutectic area and eutectic cell size and also volume percent of different carbides of new steel, which is heat treated under different conditions, are also determined. The results show that the a niobium addition modifies the cast structure of Nb-alloyed hot work tool steel, and reduces the size and volume of eutectic cells, and increases the maximum hardness of the steel.
引用
收藏
页码：61 / 66
页数：6
相关论文
共 50 条
  • [41] Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
    Adem Çiçek
    Fuat Kara
    Turgay Kıvak
    Ergün Ekici
    İlyas Uygur
    Journal of Materials Engineering and Performance, 2015, 24 : 4431 - 4439
  • [42] Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
    Cicek, Adem
    Kara, Fuat
    Kivak, Turgay
    Ekici, Ergun
    Uygur, Ilyas
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (11) : 4431 - 4439
  • [43] Fatigue–creep interaction based on continuum damage mechanics for AISI H13 hot work tool steel at elevated temperatures
    Hai-sheng Chen
    Yong-qin Wang
    Wei-qi Du
    Liang Wu
    Yuan-xin Luo
    Journal of Iron and Steel Research International, 2018, 25 : 580 - 588
  • [44] Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel
    Telasang, G.
    Majumdar, J. Dutta
    Padmanabham, G.
    Manna, I.
    SURFACE & COATINGS TECHNOLOGY, 2015, 261 : 69 - 78
  • [45] Characterization of Hot Deformation Behavior and Processing Map of As-Cast H13 Hot Work Die Steel
    Yahui Han
    Changsheng Li
    Jinyi Ren
    Chunlin Qiu
    En LI
    Shuaishuai Chen
    Metals and Materials International, 2021, 27 : 3574 - 3589
  • [46] Characterization of Hot Deformation Behavior and Processing Map of As-Cast H13 Hot Work Die Steel
    Han, Yahui
    Li, Changsheng
    Ren, Jinyi
    Qiu, Chunlin
    Li, En
    Chen, Shuaishuai
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (09) : 3574 - 3589
  • [47] Prediction and optimization of cutting temperature on hard-turning of AISI H13 hot work steel
    Elsadek, Ahmed A.
    Gaafer, Ahmed M.
    Mohamed, S. S.
    Mohamed, A. A.
    SN APPLIED SCIENCES, 2020, 2 (04):
  • [48] Prediction and optimization of cutting temperature on hard-turning of AISI H13 hot work steel
    Ahmed A. Elsadek
    Ahmed M. Gaafer
    S. S. Mohamed
    A. A. Mohamed
    SN Applied Sciences, 2020, 2
  • [49] Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
    Gunen, Ali
    Karahan, Ismail Hakki
    Karakas, Mustafa Serdar
    Kurt, Bulent
    Kanca, Yusuf
    Cay, Vedat Veli
    Yildiz, Murat
    METALS AND MATERIALS INTERNATIONAL, 2020, 26 (09) : 1329 - 1340
  • [50] Fatigue-creep interaction based on continuum damage mechanics for AISI H13 hot work tool steel at elevated temperatures
    Chen, Hai-sheng
    Wang, Yong-qin
    Du, Wei-qi
    Wu, Liang
    Luo, Yuan-xin
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (05) : 580 - 588
12345