Modeling of Air to Air Enthalpy Heat Exchanger

被引：27

作者：

Nasif, Mohammad Shakir ^{[1
]}

Al-Waked, Ra'fat ^{[2
]}

Behnia, Masud ^{[3
]}

Morrison, Graham ^{[4
]}

机构：

[1] Opus Int Consultants, Auckland 1010, New Zealand

[2] Prince Mohammad Bin Fahd Univ, Dept Mech Engn, Al Khobar, Saudi Arabia

[3] Univ Sydney, Sch Aerosp Mech & Mechatron Engn, Sydney, NSW 2006, Australia

[4] Univ New S Wales, Sch Mech & Mfg Engn, Sydney, NSW, Australia

来源：

HEAT TRANSFER ENGINEERING | 2012年 / 33卷 / 12期

基金：

澳大利亚研究理事会;

关键词：

ENERGY RECOVERY VENTILATOR; MOISTURE TRANSFER; MASS-TRANSFER; MEMBRANE; PERFORMANCE; POINTS;

D O I：

10.1080/01457632.2012.659616

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The thermal performance of a Z-shaped enthalpy heat exchanger utilizing 45-gsm Kraft paper as the heat and moisture transfer surface for heating, ventilation, and air conditioning (HVAC) energy recovery is experimentally investigated through temperature and moisture content measurements. A mathematical model is developed and validated against the experimental results using the effectiveness-NTU method. In this model the paper moisture transfer resistance is determined by paper moisture permeability measurements. Results showed that the paper moisture transfer resistance is not constant and varies with moisture gradient across the paper. Furthermore, the model is used to predict the heat exchanger performance for different heat exchanger flow configurations. The results showed that higher effectiveness values are achieved when the heat exchanger flow path width is reduced. Temperature and moisture distribution in the heat exchanger is also studied using a computational fluid dynamics package (FLUENT). To model the moisture transfer through the porous materials a nondimensional sensible-latent effectiveness ratio was developed to obtain the moisture boundary conditions on the heat exchanger surface.

引用

页码：1010 / 1023

页数：14

共 50 条

[31] Regenerative air heat exchanger with intermediate heat carrier
Nizovtsev, M., I
Letushko, V. N.
Borodulin, V. Yu
ALL-RUSSIAN CONFERENCE XXXIV SIBERIAN THERMOPHYSICAL SEMINAR, DEDICATED TO THE 85TH ANNIVERSARY OF ACADEMICIAN A. K. REBROV, 2018, 1105
[32] PREHEATING INLET AIR WITH A LIQUID-TO-AIR HEAT-EXCHANGER
CLANTON, CJ
JACOBSON, LD
BOEDICKER, JJ
TRANSACTIONS OF THE ASAE, 1990, 33 (06): : 2027 - 2032
[33] AIR AIR-HEAT EXCHANGER IN THEORY AND PRACTICE - A KTBL DISCUSSION
不详
LANDTECHNIK, 1983, 38 (01): : 14 - 14
[34] Application of ground-to-air heat exchanger for preheating of supply air
Sorokins, Juris
Borodinecs, Anatolijs
Zemitis, Jurgis
ENERGY MANAGEMENT OF MUNICIPAL TRANSPORTATION FACILITIES AND TRANSPORT (EMMFT 2017), 2017, 90
[35] Artificial Neural Modeling of the Heat Transfer in an Air Cooled Heat Exchanger Equipped with Butterfly Inserts
Karami, A.
Rezaei, E.
Rahimi, M.
Zanjani, M.
INTERNATIONAL ENERGY JOURNAL, 2012, 13 (01): : 21 - 28
[36] Artificial neural modeling of the heat transfer in an air cooled heat exchanger equipped with butterfly inserts
Mechanical Engineering Department, Kermanshah University of Technology, Kermanshah, Iran
不详
不详
Int. Energy J., 2012, 1 (21-28):
[37] Heat pipe heat exchanger for heat recovery in air conditioning
Abd El-Baky, Mostafa A.
Mohamed, Mousa M.
APPLIED THERMAL ENGINEERING, 2007, 27 (04) : 795 - 801
[38] Numerical Study of Heat Transfer in an Air-to-Air Heat Exchanger Integrated with a Thermoelectric Heat Pump
Cheon, Seong-Yong
Dong, Hye-Won
Kang, Yong-Kwon
Lee, Soo-Jin
Jeong, Jae-Weon
PROCEEDINGS OF BUILDING SIMULATION 2019: 16TH CONFERENCE OF IBPSA, 2020, : 1929 - 1933
[39] Comparative Energy and Exergy Analyses of Air Conditioning Systems Integrated with an Air Enthalpy Exchanger for Different Refrigerants
Al-Sulaiman, Fahad A.
JOURNAL OF ENERGY ENGINEERING, 2018, 144 (03)
[40] Operation characteristics of air-air heat pipe inserted plate heat exchanger for heat recovery
Xue, Lianzheng
Ma, Guoyuan
Zhou, Feng
Wang, Lei
ENERGY AND BUILDINGS, 2019, 185 : 66 - 75

← 1 2 3 4 5 →