Solderability, IMC evolution, and shear behavior of low-Ag Sn0.7Ag0.5Cu-BiNi/Cu solder joint

被引：35
|
作者：
Liu, Yang [1 ]
Sun, Fenglian [1 ]
Zhang, Hongwu [1 ]
Zou, Pengfei [1 ]
机构：
[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin 150040, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS | 2012年 / 23卷 / 09期
基金：
中国国家自然科学基金;
关键词：
LEAD-FREE SOLDERS; TENSILE PROPERTIES; CU; ALLOY; RELIABILITY; PERFORMANCE; ADDITIONS; BI;
D O I：
10.1007/s10854-012-0649-1
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The solderability, intermetallic compounds (IMC) evolution, and shear behavior of the low-Ag Sn0.7Ag0.5Cu-3.5Bi-0.05Ni (SAC0705-BiNi)/Cu solder joint was investigated by comparing with Sn0.7Ag0.5Cu (SAC0705)/Cu and Sn3.0Ag0.5Cu (SAC305)/Cu solder joints. Experimental results demonstrated that the melting temperature of Sn0.7Ag0.5Cu-BiNi solder alloy was lower than that of SAC0705 and SAC305 solder. But the melting range of Sn0.7Ag0.5Cu-BiNi was wider. Compared with the other two kinds of alloys, SAC0705-BiNi showed the best wettability. SAC0705/Cu, SAC0705-BiNi/Cu, and SAC305 solder joints appeared similar IMC morphologies and grain size at the beginning of soldering, but evolved to different appearance as the soldering process proceeded. The growth rate of the IMC grains in SAC0705-BiNi/Cu solder joint was the lowest because of the refinement of Ni. SAC0705-BiNi/Cu solder joint showed the highest shear strength before and after being aged, mainly due to the enhancement of solid solution strengthening and dispersion strengthening of Bi and Ni in the bulk solder, as well as the refinement of Ni at the soldering interface.
引用
收藏
页码：1705 / 1710
页数：6
相关论文
共 50 条
  • [21] Microstructure and shear behavior of solder joint with Sn58Bi/Sn3.0Ag0.5Cu/Cu superposition structure
    Liu, Yang
    Xu, Ruisheng
    Zhang, Hao
    Sun, Fenglian
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (15) : 14077 - 14084
  • [22] Microstructure and shear behavior of solder joint with Sn58Bi/Sn3.0Ag0.5Cu/Cu superposition structure
    Yang Liu
    Ruisheng Xu
    Hao Zhang
    Fenglian Sun
    Journal of Materials Science: Materials in Electronics, 2019, 30 : 14077 - 14084
  • [23] Morphological Evolution and Growth Kinetics of Interfacial Cu6Sn5 and Cu3Sn Layers in Low-Ag Sn-0.3Ag-0.7Cu-xMn/Cu Solder Joints During Isothermal Ageing
    Tang, Y.
    Luo, S. M.
    Li, Z. H.
    Hou, C. J.
    Li, G. Y.
    JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (10) : 5913 - 5929
  • [24] The effect of Ag3Sn and Cu3Sn nanoparticles on the IMC morphology of Sn-3.0Ag-0.5Cu solder
    Shao, Hangting
    Li, Ming
    Hu, Anming
    ICEPT2019: THE 2019 20TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2019,
  • [25] Morphological Evolution and Growth Kinetics of Interfacial Cu6Sn5 and Cu3Sn Layers in Low-Ag Sn-0.3Ag-0.7Cu-xMn/Cu Solder Joints During Isothermal Ageing
    Y. Tang
    S.M. Luo
    Z.H. Li
    C.J. Hou
    G.Y. Li
    Journal of Electronic Materials, 2018, 47 : 5913 - 5929
  • [26] Effect of 0.5 wt% nano-TiO2 addition into low-Ag Sn0.3Ag0.7Cu solder on the intermetallic growth with Cu substrate during isothermal aging
    Wu, R. W.
    Tsao, L. C.
    Chen, R. S.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (03) : 1858 - 1865
  • [27] Effect of 0.5 wt% nano-TiO2 addition into low-Ag Sn0.3Ag0.7Cu solder on the intermetallic growth with Cu substrate during isothermal aging
    R. W. Wu
    L. C. Tsao
    R. S. Chen
    Journal of Materials Science: Materials in Electronics, 2015, 26 : 1858 - 1865
  • [28] Effects of Mn nanoparticles on tensile properties of low-Ag Sn-0.3Ag-0.7Cu-xMn solder alloys and joints
    Tang, Y.
    Luo, S. M.
    Huang, W. F.
    Pan, Y. C.
    Li, G. Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 719 : 365 - 375
  • [29] Shear Fracture Behavior of Sn3.0Ag0.5Cu Solder joints on Cu Pads with Different Solder Volumes
    Tian, Yanhong
    Wang, Chunqing
    Yang, Shihua
    Lin, Penrong
    Liang, Le
    2008 INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING, VOLS 1 AND 2, 2008, : 684 - +
  • [30] Effect of Pr addition on properties and Sn whisker growth of Sn–0.3Ag–0.7Cu low-Ag solder for electronic packaging
    Jie Wu
    Songbai Xue
    Jingwen Wang
    Jianxin Wang
    Shuang Liu
    Journal of Materials Science: Materials in Electronics, 2017, 28 : 10230 - 10244
12345