Dynamic Response of a Lightweight Stator Structure for a Large Diameter Direct-Drive Wind Turbine Generator

被引：0
|
作者：
Nutakor, Charles [1 ]
Semken, Scott [1 ]
Heikkinen, Janne [1 ]
Sopanen, Jussi [1 ]
Mikkola, Aki [1 ]
机构：
[1] Lappeenranta Univ Technol, Skinnarilankatu 34, Lappeenranta 53850, Finland
来源：
PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON ROTOR DYNAMICS - IFTOMM, VOL. 4 | 2019年 / 63卷
关键词：
Lightweight stator structure; Layered sheet steel; Cogging torque; Direct-driven wind turbine;
D O I：
10.1007/978-3-319-99272-3_35
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A lightweight wheel structure developed for rotor and stator use in large diameter direct-drive wind turbine generator is presented. The wheel structure uses layered sheet-steel elements to form the spokes and rim. This novel wheel structure is assumed to be more flexible than the existing conventional machine designs. Concerns with the dynamic response of the structure form the key motivation of the study presented here. As such, a computationally efficient methodology to predict the dynamic response has been presented. The dynamic model is employed to simulate the transient effects at startup and effects of cogging excitation on the direct-driven wind turbine.
引用
收藏
页码：503 / 517
页数：15
相关论文
共 50 条
  • [11] Promising Direct-Drive Generator System for Large Wind Turbines
    Bang, Deok-je
    Polinder, Henk
    Shrestha, Ghanshyam
    Ferreira, Jan Abraham
    EPE JOURNAL, 2008, 18 (03) : 7 - 13
  • [12] Promising direct-drive generator system for large wind turbines
    Bang, Deok-Je
    Polinder, Henk
    Shrestha, Ghanshyam
    Ferreira, Jan Abraham
    2008 PROCEEDINGS OF THE EPE WIND ENERGY CHAPTER-1ST SEMINAR, 2008, : 43 - 52
  • [13] Evaluation Method of Stator Insulation for Direct-drive Wind Turbine Generator Based on Accelerated Multi-factor Aging
    Liu, Qingyuan
    Liu, Xuezhong
    Li, Yanqin
    Wang, Meng
    Chen, Hongsheng
    Zhao, Yong
    Ma, Yong
    2019 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (CEIDP), 2019, : 138 - 141
  • [14] Shape optimization for light weight design of direct-drive generator in large-scale wind turbine
    Kwang-Ki Lee
    Yun-Cheol Ro
    Yang-Gyun Kim
    Kwon-Hee Lee
    Seung-Ho Han
    International Journal of Precision Engineering and Manufacturing, 2014, 15 : 2101 - 2108
  • [15] Shape Optimization for Light Weight Design of Direct-Drive Generator in Large-Scale Wind Turbine
    Lee, Kwang-Ki
    Ro, Yun-Cheol
    Kim, Yang-Gyun
    Lee, Kwon-Hee
    Han, Seung-Ho
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014, 15 (10) : 2101 - 2108
  • [16] Simulation of an Optimal Design of Permanent Magnet Direct-Drive Wind Turbine Generator
    Tapiador, Jed I.
    Gan Lim, Laurence A.
    Augusto, Gerardo L.
    2017 IEEE 9TH INTERNATIONAL CONFERENCE ON HUMANOID, NANOTECHNOLOGY, INFORMATION TECHNOLOGY, COMMUNICATION AND CONTROL, ENVIRONMENT AND MANAGEMENT (IEEE HNICEM), 2017,
  • [17] Small-scale Urban Venturi Wind Turbine: Direct-Drive Generator
    Paulides, J. J. H.
    Encica, L.
    Jansen, J. W.
    Lomonova, E. A.
    van Wijck, D.
    2009 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, VOLS 1-3, 2009, : 1362 - +
  • [18] In-Situ Experimental Modal Analysis of a Direct-Drive Wind Turbine Generator
    Kirschneck, M.
    Rixen, D. J.
    Polinder, Henk
    van Ostayen, Ron
    EXPERIMENTAL TECHNIQUES, ROTATING MACHINERY, AND ACOUSTICS, VOL 8, 2015, : 157 - 165
  • [19] Structural Optimization of a Direct-Drive Wind Turbine Generator Inspired by Additive Manufacturing
    Hayes, Austin
    Sethuraman, Latha
    Dykes, Katherine
    Fingersh, Lee Jay
    46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 740 - 752
  • [20] Review of direct-drive radial flux wind turbine generator mechanical design
    Stander, Johan N.
    Venter, Gerhard
    Kamper, Maarten J.
    WIND ENERGY, 2012, 15 (03) : 459 - 472
12345