Creep, shrinkage, and thermal strains in normal, medium, and high-strength concretes during hydration

被引:0
|
作者
Khan, AA
Cook, WD
Mitchell, D
机构
关键词
compressive strength; creep tests; curing; high-strength concretes; shrinkage;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents an experimental study on early-age shrinkage and thermal and creep strains of normal (30 MPa), medium (70 MPa), and high-strength (100 MPa) concretes subjected to sealed and air-dried curing. It was found that demolding at very early ages resulted in greater shrinkage and thermal strains in high-strength concrete than in medium strength concrete, which in turn showed greater strains than the normal strength concrete. It was also observed that creep of the high-strength concrete containing napthalene-based superplasticizer is much more sensitive to the age of loading than the normal and medium strength concretes, with very early-age loading resulting in significantly higher creep. Predictions using the CEB-FIP creep expressions agree reasonably well with the measured creep strains, except for the case of high-strength concrete loaded at very early ages (i.e., less than 24 hr).
引用
收藏
页码:156 / 163
页数:8
相关论文
共 50 条
  • [42] Use of Recycled Rubber Tires in Normal- and High-Strength Concretes
    Wong, Sook-Fun
    Ting, Seng-Kiong
    ACI MATERIALS JOURNAL, 2009, 106 (04) : 325 - 332
  • [43] Effect of silica fume on the plastic shrinkage and pore water pressure of high-strength concretes
    Hammer, TA
    INTERNATIONAL RILEM WORKSHOP ON SHRINKAGE OF CONCRETE, SHRINKAGE 2000, PROCEEDINGS, 2000, 17 : 75 - 89
  • [44] Effect of silica fume on the plastic shrinkage and pore water pressure of high-strength concretes
    T. A. Hammer
    Materials and Structures, 2001, 34 (5) : 273 - 278
  • [45] Effect of Steel Fibers on Plastic Shrinkage Cracking of Normal and High Strength Concretes
    Eren, Ozgur
    Marar, Khaled
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2010, 13 (02): : 135 - 141
  • [47] THE MICROSTRUCTURE OF HIGH-STRENGTH MORTARS AND CONCRETES
    RUBNER, K
    SCHMIDT, C
    FRESENIUS JOURNAL OF ANALYTICAL CHEMISTRY, 1994, 349 (1-3): : 243 - 245
  • [48] STUDIES ON COMMERCIAL HIGH-STRENGTH CONCRETES
    HWEE, YS
    RANGAN, BV
    ACI MATERIALS JOURNAL, 1990, 87 (05) : 440 - 445
  • [49] Effects of manufactured-sand on dry shrinkage and creep of high-strength concrete
    Mingkai Zhou
    Jiliang Wang
    Lide Zhu
    Tusheng He
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 249 - 253
  • [50] Comparison of prediction models for shrinkage and creep of high-strength, lightweight aggregate concrete
    Mei, Sheng-qi
    Xie, Hui-bing
    Su, Li
    Gong, Jian
    Guo, Kun
    Wang, Yuan-feng
    GREEN BUILDING, ENVIRONMENT, ENERGY AND CIVIL ENGINEERING, 2017, : 31 - 35