Creep, shrinkage, and thermal strains in normal, medium, and high-strength concretes during hydration

被引:0
|
作者
Khan, AA
Cook, WD
Mitchell, D
机构
关键词
compressive strength; creep tests; curing; high-strength concretes; shrinkage;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents an experimental study on early-age shrinkage and thermal and creep strains of normal (30 MPa), medium (70 MPa), and high-strength (100 MPa) concretes subjected to sealed and air-dried curing. It was found that demolding at very early ages resulted in greater shrinkage and thermal strains in high-strength concrete than in medium strength concrete, which in turn showed greater strains than the normal strength concrete. It was also observed that creep of the high-strength concrete containing napthalene-based superplasticizer is much more sensitive to the age of loading than the normal and medium strength concretes, with very early-age loading resulting in significantly higher creep. Predictions using the CEB-FIP creep expressions agree reasonably well with the measured creep strains, except for the case of high-strength concrete loaded at very early ages (i.e., less than 24 hr).
引用
收藏
页码:156 / 163
页数:8
相关论文
共 50 条
  • [1] SHRINKAGE AND CREEP OF HIGH-STRENGTH, MEDIUM-STRENGTH, AND LOW-STRENGTH CONCRETES, INCLUDING OVERLOADS
    SMADI, MM
    SLATE, FO
    NILSON, AH
    ACI MATERIALS JOURNAL, 1987, 84 (03) : 224 - 234
  • [2] FREE AND RESTRAINED SHRINKAGE OF NORMAL AND HIGH-STRENGTH CONCRETES
    BLOOM, R
    BENTUR, A
    ACI MATERIALS JOURNAL, 1995, 92 (02) : 211 - 217
  • [3] Influence of coarse aggregate on the creep of normal and high-strength concretes
    Adam, I
    Ayano, T
    Sakata, K
    Kuramoto, O
    2001 SECOND INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS, VOL II, 2001, : 173 - 182
  • [4] Strength development and drying shrinkage of high-strength concretes
    Haque, MN
    CEMENT & CONCRETE COMPOSITES, 1996, 18 (05): : 333 - 342
  • [5] Stresses and creep relaxation induced in restrained autogenous shrinkage of high-strength pastes and concretes
    Igarashi, S
    Bentur, A
    Kovler, K
    ADVANCES IN CEMENT RESEARCH, 1999, 11 (04) : 169 - 177
  • [6] COMPARISON OF CREEP AND SHRINKAGE OF HIGH-STRENGTH SILICA FUME CONCRETES WITH FLY-ASH CONCRETES OF SIMILAR STRENGTHS
    LUTHER, MD
    HANSEN, W
    FLY ASH, SILICA FUME, SLAG, AND NATURAL POZZOLANS IN CONCRETE, VOL 1-2, 1989, 114 : 573 - 591
  • [7] SHRINKAGE AND CREEP OF HIGH-STRENGTH CONCRETE - REPLY
    NGAB, AS
    NILSON, AH
    SLATE, FO
    JOURNAL OF THE AMERICAN CONCRETE INSTITUTE, 1982, 79 (03): : 237 - 238
  • [8] SHRINKAGE AND CREEP OF HIGH-STRENGTH CONCRETE - DISCUSSION
    RUSSELL, HG
    JOURNAL OF THE AMERICAN CONCRETE INSTITUTE, 1982, 79 (03): : 236 - 237
  • [9] Prediction of the Basic Creep of Normal and High-strength Concretes based on an Analytical Micromechanical Model
    Zouaoui, Rahma
    Miled, Karim
    Limam, Oualid
    JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021, 19 (08) : 913 - 923
  • [10] Autogenous shrinkage and induced restraining stresses in high-strength concretes
    Igarashi, S
    Bentur, A
    Kovler, K
    CEMENT AND CONCRETE RESEARCH, 2000, 30 (11) : 1701 - 1707