Effect of strontium addition on hydrogen content and porosity shape of Al-Si alloys

被引：9

作者：

Zhang, ZH ^{[1
]}

Bian, XF ^{[1
]}

Liu, XF ^{[1
]}

机构：

[1] Shandong Univ, Minist Educ, Key Lab Liquid Struct & Hered Mat, Jinan 250061, Peoples R China

来源：

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2001年 / 14卷 / 01期

关键词：

Al-Si alloy; strontium modification; hydrogen content; porosity;

D O I：

10.1080/13640461.2001.11819422

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The HYSCAN II instrument has been used to measure hydrogen content in unmodified and modified hypoeutectic Al-10wt%Si alloys. Experimental results show that the hydrogen content of the melt increases markedly after strontium addition, reaches a maximum value after a certain time, and then decreases and tends to be close to the initial hydrogen level. In contrast in unmodified melts, hydrogen content decreases with time, and finally reaches a stable level. Moreover, porosities in unmodified samples are found to be long, fissured and irregular. In modified samples, however, porosities are broad, rounded and regular. The mechanism of the effect of strontium addition has also been discussed.

引用

页码：31 / 35

页数：5

共 50 条

[31] Occurring behavior of porosity and feeding capabilities of sodium- and strontium-modified Al-Si alloys
1600, Publ by American Foundrymen's Soc, Des Plaines, IL, USA
[32] Modification of eutectic Si in Al-Si alloys with Eu addition
Li, J. H.
Wang, X. D.
Ludwig, T. H.
Tsunekawa, Y.
Arnberg, L.
Jiang, J. Z.
Schumacher, P.
ACTA MATERIALIA, 2015, 84 : 153 - 163
[33] Effect of Sb Addition on the Al-Si Eutectic of Hypoeutectic Al-Si Casting Alloys under Different Cooling Rates
Yan, Han
Zhu, Congcong
Wu, Zhen
Gao, Wenli
MATERIALS TRANSACTIONS, 2020, 61 (01) : 181 - 187
[34] Al-Si and Al-Si-Mg Cast Alloys Shrinkage Porosity Estimation
Samavedam, S.
Sundarrajan, S.
ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (01) : 61 - 68
[35] Discussion of “Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al5FeSi in Hypoeutectic Al-Si Foundry Alloys”*
John Campbell
Metallurgical and Materials Transactions A, 2009, 40 : 1009 - 1010
[36] Effect of Silicon Content on Solidification Parameters and Microhardness of Al-Si Alloys
Ibanez, Edgar R.
Rodriguez, Carlos D.
Alonso, Paula R.
Ares, Alicia E.
LIGHT METALS 2024, 2024, : 399 - 408
[37] Discussion of "Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al5FeSi in Hypoeutectic Al-Si Foundry Alloys"*
Campbell, John
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (05): : 1009 - 1010
[38] SEGREGATION BEHAVIOR OF STRONTIUM IN MODIFIED AND UNMODIFIED AL-SI ALLOYS
CLAPHAM, L
SMITH, RW
CIM BULLETIN, 1988, 81 (914): : 95 - 95
[39] SEGREGATION BEHAVIOR OF STRONTIUM IN MODIFIED AND UNMODIFIED AL-SI ALLOYS
CLAPHAM, L
SMITH, RW
JOURNAL OF CRYSTAL GROWTH, 1988, 92 (1-2) : 263 - 270
[40] The role of the eutectic in porosity formation in Al-Si foundry alloys
McDonald, SD
Lu, L
Nogita, K
Dahle, AK
SHAPING CASTING: THE JOHN CAMPBELL SYMPOSIUM, 2005, : 125 - 133

← 1 2 3 4 5 →