Fracture Characteristics of AISI D2 Tool Steel at Different Tempering Temperatures Using Acoustic Emission and Fuzzy C-Means Clustering

被引：12

作者：

Mohamad, Fotouhi ^{[1
]}

Cevat, Teymuri Sindi ^{[1
]}

Mehdi, Ahmadi ^{[1
]}

Farzad, Pashmforoush ^{[1
]}

机构：

[1] Amirkabir Univ Technol, Dept Mech Engn, Nondestruct Testing Lab, Tehran 15914, Iran

来源：

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2013年 / 38卷 / 08期

关键词：

Acoustic emission; Heat treatments; Failure analysis; Fuzzy C-means clustering; TENSILE DEFORMATION; FAILURE; BEHAVIOR; TESTS;

D O I：

10.1007/s13369-013-0579-0

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

In this paper, the effect of tempering on crack propagation and fracture mechanism of a cold-work tool steel is investigated. Acoustic emission (AE) monitoring with fuzzy C-means (FCM) clustering was developed in order to detect the different fracture mechanisms during fracture toughness tests of specimens tempered at 5 different temperatures from 0 to 575 A degrees C. The obtained AE signals were analyzed by considering AE parameters such as amplitude, count, frequency, energy, and classified using FCM. Scanning electron microscopy (SEM) observation was also used to determine the different fracture mechanisms. The results show that the AE characteristics and FCM classification are efficient tools in the analysis of AE signals to detect fracture mechanism, and there is a good agreement with the results of these tools and microscopic observation by SEM.

引用

页码：2205 / 2217

页数：13

共 50 条

[21] INFLUENCE OF CRYOGENIC TREATMENT ON MICROSTRUCTURE CHARACTERISTICS AND MECHANICAL PROPERTIES OF AISI D2 TOOL STEEL
Ghasemi-Nanesa, Hadi
Jahazi, Mohammad
Trigo, Gil
Levasseur, Tom
TMS 2014 SUPPLEMENTAL PROCEEDINGS, 2014, : 991 - 997
[22] Effects of Cooling Parameter and Cryogenic Treatment on Microstructure and Fracture Toughness of AISI D2 Tool Steel
Moscoso, Mauro Francisco Castro
Ramos, Fabiano Dornelles
de Lima Lessa, Cleber Rodrigo
Cunha, Pedro Henrique Costa Pereira
Toniolo, Juliano Cantarelli
Lemos, Guilherme Vieira Braga
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (12) : 7929 - 7939
[23] Effects of Cooling Parameter and Cryogenic Treatment on Microstructure and Fracture Toughness of AISI D2 Tool Steel
Mauro Francisco Castro Moscoso
Fabiano Dornelles Ramos
Cleber Rodrigo de Lima Lessa
Pedro Henrique Costa Pereira Cunha
Juliano Cantarelli Toniolo
Guilherme Vieira Braga Lemos
Journal of Materials Engineering and Performance, 2020, 29 : 7929 - 7939
[24] Matching SVM kernel's suitability to data characteristics using tree by fuzzy C-means clustering
Ali, S
Smith, KA
DESIGN AND APPLICATION OF HYBRID INTELLIGENT SYSTEMS, 2003, 104 : 553 - 562
[25] 3D magnetization inversion using fuzzy c-means clustering with application to geology differentiation
Li, Yaoguo
Sun, Jiajia
GEOPHYSICS, 2016, 81 (05) : J61 - J78
[26] P2P Traffic Identification and Optimization Using Fuzzy C-means Clustering
Liu, Duo
Lung, Chung-Horng
IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ 2011), 2011, : 2245 - 2252
[27] Simulation of Boriding Kinetics of AISI D2 Steel using Two Different Approaches
M. Keddam
M. Kulka
Metal Science and Heat Treatment, 2020, 61 : 756 - 763
[28] Simulation of Boriding Kinetics of AISI D2 Steel using Two Different Approaches
Keddam, M.
Kulka, M.
METAL SCIENCE AND HEAT TREATMENT, 2020, 61 (11-12) : 756 - 763
[29] Assessment of Grinding Burn of AISI D2 Tool Steel Using Barkhausen Noise Technique
Shrivastava A.K.
Sharma A.
Awale A.S.
Yusufzai M.Z.K.
Vashista M.
Journal of The Institution of Engineers (India): Series C, 2021, 102 (04): : 885 - 896
[30] Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel
Guu, YH
Hocheng, H
Chou, CY
Deng, CS
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 358 (1-2): : 37 - 43

← 1 2 3 4 5 →