Numerical Validation of Experimental Result in Deep-Drawing

被引：4
|
作者：
Choubey, Ajay Kumar [1 ]
Agnihotri, Geeta [1 ]
Sasikumar, C. [1 ]
机构：
[1] Maulana Azad Natl Inst Technol, Bhopal 462051, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期
关键词：
Blank-Holder Pressure; Deep drawing; FEM; Flange Wrinkling; Mild Steel; Technology window;
D O I：
10.1016/j.matpr.2015.07.160
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Deep drawing process is an important sheet metal forming process used in domestic and automotive components. In this process blank material is converted into the desired complicated shape by punch. In this research paper, a 3- Dimensional elasto-plastic Finite Element (FE) model for Mild Steel IS 2062 material as blank has been developed to study the behaviour of the flange wrinkling and deep drawing parameters under different Blank-Holder Pressure (BHP = 2.5 to 9.5 MPa). This paper is discussing about the technology window for acceptable product. The present process successfully produces shape with drawing ratio of 2.0. For this, commercially available Finite Element software ANSYS 14.0 has been used. Simulation results are critically studied and salient conclusions have been drawn. An experimental setup is built accordingly with a half cone angle of 40 degrees. The outputs of finite element simulation are used to investigate the effect of blank-holder pressure on product integrity and mechanical properties. The experimental results were compared with FE results. (C) 2015 Published by Elsevier Ltd.
引用
收藏
页码：1951 / 1958
页数：8
相关论文
共 50 条
  • [31] Numerical study of the flange earring of deep-drawing sheets with stronger anisotropy
    Hu, P
    Liu, YQ
    Wang, JC
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (01) : 279 - 296
  • [32] Mechanical analysis on deep-drawing with ironing
    Duanya Jishu/Forging & Stamping Technology, 1997, 22 (01): : 19 - 21
  • [33] The Occurrence of Rupture in Deep-Drawing of Paperboard
    Wallmeier, Malte
    Hauptmann, Marek
    Majschak, Jens-Peter
    BIORESOURCES, 2016, 11 (02): : 4688 - 4704
  • [34] Formability of deep-drawing steel sheets
    Cada, R
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 4: CHARACTERIZATION AND PRODUCTION/DESIGN, 1997, : 463 - 466
  • [35] RAPID AND ACCURATE EXPERIMENTAL DETERMINATION OF ANISOTROPY AND PLASTICITY OF DEEP-DRAWING SHEETS
    JEGADEN, G
    VOINCHET, J
    ROCQUET, P
    NATURE, 1962, 193 (4817) : 771 - &
  • [36] Numerical simulation and experimental validation of a multi-step deep drawing process
    Pacheco, Matias
    Celentano, Diego
    Garcia-Herrera, Claudio
    Mendez, Julio
    Flores, Fernando
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2017, 10 (01) : 15 - 27
  • [37] ON COMPLETE SOLUTION OF DEEP-DRAWING PROBLEM
    WOO, DM
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1968, 10 (02) : 83 - &
  • [38] Numerical simulation and experimental validation of a multi-step deep drawing process
    Matías Pacheco
    Diego Celentano
    Claudio García-Herrera
    Julio Méndez
    Fernando Flores
    International Journal of Material Forming, 2017, 10 : 15 - 27
  • [39] SURFACE ROUGHNESS OF DEEP-DRAWING STRIP
    CHEKMAREV, AP
    MELESHKO, VI
    KACHAILO.AP
    MAZUR, VL
    STAL IN ENGLISH-USSR, 1969, (12): : 1064 - +
  • [40] THEORY OF DEEP-DRAWING .3.
    HERMANS, IH
    MICROTECNIC, 1971, 25 (05): : 322 - &
12345