Damping measurements of laminated composite materials and aluminum using the hysteresis loop method

被引：19
|
作者：
Abramovich, H. [1 ]
Govich, D. [1 ]
Grunwald, A. [1 ]
机构：
[1] Technion Israel Inst Technol, Fac Aerosp Engn, IL-32000 Haifa, Israel
来源：
PROGRESS IN AEROSPACE SCIENCES | 2015年 / 78卷
关键词：
Damping coefficient; Loss factor; Hysteresis method; Laminated composite material; Aluminum;
D O I：
10.1016/j.paerosci.2015.05.006
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
The damping characteristics of composite laminates made of Hexply 8552 AGP 280-5H (fabric), used for structural elements in aeronautical vehicles, have been investigated in depth using the hysteresis loop method and compared to the results for aluminum specimens (2024 T351). It was found that the loss factor, eta obtained by the hysteresis loop method is linearly dependent only on the applied excitation frequency and is independent of the preloading and the stress amplitudes. For the test specimens used in the present tests series, it was found that the damping of the aluminum specimens is higher than the composite ones for longitudinal direction damping, while for bending vibrations the laminates exhibited higher damping values. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：8 / 18
页数：11
相关论文
共 50 条
  • [21] Identification of the damping properties of orthotropic composite materials using a mixed numerical experimental method
    Vrije Universiteit Brussel, Brussels, Belgium
    Appl Compos Mater, 1 (13-33):
  • [22] Damage detection in composite structures with high-damping materials using time reversal method
    Xiao, Hang
    Shen, Yanfeng
    Xiao, Li
    Qu, Wenzhong
    Lu, Ye
    NONDESTRUCTIVE TESTING AND EVALUATION, 2018, 33 (03) : 329 - 345
  • [23] An attempt of accuracy assessment of the hysteresis loop and power loss in magnetic materials during control measurements
    Grys, Slawomir
    Najgebauer, Mariusz
    MEASUREMENT, 2021, 174
  • [24] HYSTERESIS LOOP STUDIES OF MELT-SPUN HARDMAGNETIC MATERIALS BY HALL-EFFECT MEASUREMENTS
    FROBEL, P
    FREYHARDT, HC
    BARNER, K
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1992, 104 (pt 2) : 1155 - 1156
  • [25] Modeling the Hysteresis Loop in Hard Magnetic Materials Using T(x) Model
    Dospial, M.
    Nabialek, M.
    Szota, M.
    Pietrusiewicz, P.
    Gruszka, K.
    Bloch, K.
    ACTA PHYSICA POLONICA A, 2014, 126 (01) : 170 - 171
  • [26] MINOR LOOP LOSSES IN HYSTERESIS TORQUE DEVICES USING PERMANENT MAGNET MATERIALS
    RAHMAN, MA
    IEEE TRANSACTIONS ON MAGNETICS, 1970, MAG6 (03) : 474 - &
  • [27] Measurement of Hysteresis Loop on Soft Magnetic Materials Using Lock-In Amplifier
    Shirane, Takashi
    Ito, Misato
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (04) : 1437 - 1440
  • [28] Features of Formation and Properties of Titanium–Aluminum System Laminated Composite Materials with Different Silicon Content
    A. I. Kovtunov
    S. V. Myamin
    Yu. Yu. Khokhlov
    Metallurgist, 2019, 62 : 956 - 962
  • [29] A CUSTOMIZATION APPROACH FOR DESIGN USING COMMERCIALLY AVAILABLE LAMINATED COMPOSITE MATERIALS
    Nandi, Soumitra
    Siddique, Zahed
    Altan, Cengiz
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2011, VOL 9, 2012, : 657 - 667
  • [30] Adaptive shape control of laminated composite plates using piezoelectric materials
    Varadarajan, S
    Chandrashekhara, K
    Agarwal, S
    AIAA JOURNAL, 1998, 36 (09) : 1694 - 1698
12345