Damping measurements of laminated composite materials and aluminum using the hysteresis loop method

被引：19
|
作者：
Abramovich, H. [1 ]
Govich, D. [1 ]
Grunwald, A. [1 ]
机构：
[1] Technion Israel Inst Technol, Fac Aerosp Engn, IL-32000 Haifa, Israel
来源：
PROGRESS IN AEROSPACE SCIENCES | 2015年 / 78卷
关键词：
Damping coefficient; Loss factor; Hysteresis method; Laminated composite material; Aluminum;
D O I：
10.1016/j.paerosci.2015.05.006
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
The damping characteristics of composite laminates made of Hexply 8552 AGP 280-5H (fabric), used for structural elements in aeronautical vehicles, have been investigated in depth using the hysteresis loop method and compared to the results for aluminum specimens (2024 T351). It was found that the loss factor, eta obtained by the hysteresis loop method is linearly dependent only on the applied excitation frequency and is independent of the preloading and the stress amplitudes. For the test specimens used in the present tests series, it was found that the damping of the aluminum specimens is higher than the composite ones for longitudinal direction damping, while for bending vibrations the laminates exhibited higher damping values. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：8 / 18
页数：11
相关论文
共 50 条
  • [1] Passive damping of laminated composite materials with engineered defects
    Fronk, TH
    Venkata, A
    Fugal, SR
    SMART STRUCTURES AND MATERIALS 2002: DAMPING AND ISOLATION, 2002, 4697 : 43 - 50
  • [2] Analysis of smart damping of laminated composite beams using mesh free method
    S. R. Sahoo
    M. C. Ray
    International Journal of Mechanics and Materials in Design, 2018, 14 : 359 - 374
  • [3] Analysis of smart damping of laminated composite beams using mesh free method
    Sahoo, S. R.
    Ray, M. C.
    INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, 2018, 14 (03) : 359 - 374
  • [4] An Evolutionary Computation-Based Method for Nondestructive Tensile Force Measurements in Two Materials Using Hysteresis Loop
    Zhu, Zhongyang
    Sun, Guangmin
    Liu, Anqi
    He, Cunfu
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2020, 69 (09) : 6281 - 6295
  • [5] Hybrid vibration control of laminated composite structures using magnetostrictive and hard damping materials
    Buravalla, VR
    Bhattacharya, B
    Tomlinson, GR
    SMART STRUCTURES AND MATERIALS 2001: DAMPING AND ISOLATION, 2001, 4331 : 386 - 395
  • [6] Correlations between mode-II fracture toughness and nondestructive damping measurements in laminated composite materials
    Zhao, H
    Gibson, RF
    MATERIALS EVALUATION, 1996, 54 (10) : 1154 - 1160
  • [7] EXPANDED HYSTERESIS LOOP METHOD FOR MEASURING DAMPING PROPERTIES OF CONCRETE
    ASHBEE, RA
    HERITAGE, CAR
    JORDAN, RW
    MAGAZINE OF CONCRETE RESEARCH, 1976, 28 (96) : 148 - 156
  • [8] Damping characteristics and parameter identification of an asymmetric hysteresis model of entangled metallic wire materials/disc springs laminated composite dampers
    Wu Y.
    Cheng H.
    Bai H.
    Zi B.
    Tang Y.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2022, 41 (20): : 270 - 276and314
  • [9] VISCOUS DAMPING APPROXIMATION OF LAMINATED ANISOTROPIC COMPOSITE PLATES USING THE FINITE-ELEMENT METHOD
    ZABARAS, N
    PERVEZ, T
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1990, 81 (03) : 291 - 316
  • [10] Vibration and damping analysis of laminated composite plates by the finite element method
    Rikards, R.
    Chate, A.
    Korjakin, A.
    Engineering Computations (Swansea, Wales), 1995, 12 (01): : 61 - 74
12345