Laser patterning of P2 interconnect via in thin-film CIGS PV modules

被引：68
|
作者：
Westin, P. -O. [1 ]
Zimmermann, U. [1 ]
Edoff, M. [1 ]
机构：
[1] Uppsala Univ, SE-75121 Uppsala, Sweden
来源：
SOLAR ENERGY MATERIALS AND SOLAR CELLS | 2008年 / 92卷 / 10期
关键词：
CIGS; module technology; laser scribing;
D O I：
10.1016/j.solmat.2008.04.015
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The use of laser scribed Cu(In,Ga)Se-2 as a high-speed and low-stress alternative to the standard mechanical scribing has been investigated for thin-film PV modules on glass substrates. Laser scribe lines were smooth, narrow and straight compared to the chipped and jagged mechanically scribed lines. Modules fabricated using laser patterning have reached a 15% module efficiency and fill factors as high as 73%. Contact resistances were found to be in the range of 0.1 Omega cm for standard scribing and 0.4 Omega cm for the laser-formed contacts. In spite of the elevated contact resistance performance is comparable to conventionally processed modules and dry heat stability tests are encouraging. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：1230 / 1235
页数：6
相关论文
共 50 条
  • [41] A life-cycle analysis on thin-film CdS/CdTe PV modules
    Kato, K
    Hibino, T
    Komoto, K
    Ihara, S
    Yamamoto, S
    Fujihara, H
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2001, 67 (1-4) : 279 - 287
  • [42] AN INVESTIGATION OF CADMIUM TELLURIDE THIN-FILM PV MODULES BY IMPACT PATHWAY ANALYSIS
    BAUMANN, AE
    HYNES, KM
    HILL, R
    RENEWABLE ENERGY, 1995, 6 (5-6) : 593 - 599
  • [43] Outdoor Performance Testing of Thin-Film PV Modules in the Hot and Humid Climate
    Dhere, Neelkanth G.
    Kaul, Ashwani
    Pethe, Shirish A.
    Schneller, Eric
    Shiradkar, Narendra S.
    2013 IEEE 39TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2013, : 2994 - 2997
  • [44] Color rendering properties of semi-transparent thin-film PV modules
    Lynn, Nandar
    Mohanty, Lipi
    Wittkopf, Stephen
    BUILDING AND ENVIRONMENT, 2012, 54 : 148 - 158
  • [45] ANALYTICAL CHEMICAL DIAGNOSTIC TESTING OF ENVIRONMENTAL EXPOSED THIN-FILM PV MODULES
    LONGRIGG, P
    NELSON, AJ
    SWARTZLANDER, AB
    MATSON, R
    CONFERENCE RECORD OF THE TWENTIETH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE - 1988, VOLS 1-2, 1988, : 361 - 363
  • [46] FORMATION OF A CONDUCTIVE GRID ON THIN FILM MODULES GLASS BY LASER-PATTERNING
    Jaus, J.
    Pantsar, H.
    Adurodija, O. F.
    Li, B.
    Regaard, B.
    Herfurth, H.
    Doble, D.
    35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010,
  • [47] CULNSE(2) THIN-FILM MODULES FOR UTILITY APPLICATIONS
    FREDRIC, C
    TARRANT, D
    JENSEN, C
    HUMMEL, J
    ERMER, J
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 1994, 116 (01): : 25 - 27
  • [48] CIGS P1, P2, AND P3 LASER SCRIBING WITH AN INNOV
    Murison, R.
    Dunsky, C.
    Rekow, M.
    Dinkel, C.
    Pern, J.
    Mansfield, L.
    Panarello, T.
    Nikumb, S.
    35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010,
  • [49] Validation of monolithic interconnection conductivity in laser scribed CIGS thin-film solar cells
    Markauskas, E.
    Gecys, P.
    Zemaitis, A.
    Gedvilas, M.
    Raciukaitis, G.
    SOLAR ENERGY, 2015, 120 : 35 - 43
  • [50] CHARACTERISTICS APPROACH OF THIN-FILM CIGS PV CELLS WITH CONVENTIONAL MONO-CRYSTALLINE SILICON MODEL
    Syafaruddin
    Samman, Faizal Arya
    Alfian
    Idris, Muh. Aksa
    Ahsan, Siti Hamnah
    Latief, Satriani
    INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL, 2016, 12 (01): : 171 - 180
12345