Low bending loss and effectively single-mode all-solid photonic bandgap fiber with an effective area of 650 μm2

被引：25

作者：

Kashiwagi, Masahiro ^{[1
]}

Saitoh, Kunimasa ^{[2
]}

Takenaga, Katsuhiro ^{[1
]}

Tanigawa, Shoji ^{[1
]}

Matsuo, Shoichiro ^{[1
]}

Fujimaki, Munehisa ^{[1
]}

机构：

[1] Fujikura Ltd, Opt & Elect Lab, Sakura 2858550, Japan

[2] Hokkaido Univ, Grad Sch Informat Sci & Technol, Sapporo, Hokkaido 0600814, Japan

来源：

OPTICS LETTERS | 2012年 / 37卷 / 08期

关键词：

D O I：

10.1364/OL.37.001292

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

A large-mode-area all-solid photonic bandgap fiber with a seven-cell core and five high-index rod rings is investigated. Numerical simulations show that an effective area of more than 500 mu m(2), a bending loss of less than 0.1 dB/m at a bending radius of 10 cm and effectively single-mode operation can be achieved simultaneously. A core diameter of 44.8 mu m and an effective area of 650 mu m(2) at 1064 nm are achieved in a fabricated fiber. Bending loss at 1064 nm is 0.09 dB/m at a bending radius of 7 cm. Effectively single-mode operation is also realized at a bending radius of 10 cm. (C) 2012 Optical Society of America

引用

页码：1292 / 1294

页数：3

共 50 条

[31] Bandgap and mode area analysis of all-solid square-lattice photonic bandgap fibers
Shi, Qing
Wang, Zhi
Kai, Guiyun
Jin, Long
Liu, Yange
Lv, Fuyun
Dong, Xiaoyi
PASSIVE COMPONENTS AND FIBER-BASED DEVICES IV, PTS 1 AND 2, 2007, 6781
[32] Silica-based low loss all-solid bandgap fiber
Ren, Guobin
Shum, Ping
Yu, Xia
Hu, Juanjuan
Gong, Yandong
Tong, Weijun
Luo, Jie
2007 THE JOINT INTERNATIONAL CONFERENCE ON OPTICAL INTERNET AND AUSTRALIAN CONFERENCE ON OPTICAL FIBRE TECHNOLOGY, 2007, : 7 - +
[33] Singlemode photonic crystal fibre with effective area of 600 μm2 and low bending loss
Nielsen, MD
Folkenberg, JR
Mortensen, NA
ELECTRONICS LETTERS, 2003, 39 (25) : 1802 - 1803
[34] Solid Type Low-Latency Single-Mode Fiber with Large Effective Area and Low Loss
Sagae, Y.
Matsui, T.
Tsujikawa, K.
Nakajima, K.
2018 OPTICAL FIBER COMMUNICATIONS CONFERENCE AND EXPOSITION (OFC), 2018,
[35] Highly efficient cladding-pumped single-mode three-level Yb all-solid photonic bandgap fiber lasers
Matniyaz, Turghun
Li, Wensong
Kalichevsky-Dong, Monica
Hawkins, Thomas W.
Parsons, Joshua
Gu, Guancheng
Dong, Liang
OPTICS LETTERS, 2019, 44 (04) : 807 - 810
[36] Single-Mode Photonic Crystal Fiber Design With Ultralarge Effective Area and Low Bending Loss for Ultrahigh-Speed WDM Transmission
Matsui, Takashi
Sakamoto, Taiji
Tsujikawa, Kyozo
Tomita, Shigeru
Tsubokawa, Makoto
JOURNAL OF LIGHTWAVE TECHNOLOGY, 2011, 29 (04) : 511 - 515
[37] Design Principle for Realizing Low Bending Losses in All-Solid Photonic Bandgap Fibers
Murao, Tadashi
Nagao, Koyuru
Saitoh, Kunimasa
Koshiba, Masanori
JOURNAL OF LIGHTWAVE TECHNOLOGY, 2011, 29 (16) : 2428 - 2435
[38] Design of all-solid leakage channel fibers with large mode area and low bending loss
Saitoh, Kunimasa
Tsuchida, Yukihiro
Rosa, Lorenzo
Koshiba, Masanori
Poli, Federica
Cucinotta, Annamaria
Selleri, Stefano
Pal, Mrinmay
Paul, Mukul
Ghosh, Debashri
Bhadra, Shyamal
OPTICS EXPRESS, 2009, 17 (06): : 4913 - 4919
[39] Single-mode photonic crystal fiber with low bending loss and Aeff of > 200 μm2 for ultra high-speed WDM transmission
Matsui, Takashi
Sakamoto, Taiji
Tsujikawa, Kyozo
Tomita, Shigeru
2010 CONFERENCE ON OPTICAL FIBER COMMUNICATION OFC COLLOCATED NATIONAL FIBER OPTIC ENGINEERS CONFERENCE OFC-NFOEC, 2010,
[40] Design of effectively single-mode leakage channel fibers with large mode area and low bending loss
Saitoh, Kunimasa
Tsuchida, Yukihiro
Koshiba, Masanori
IEICE ELECTRONICS EXPRESS, 2009, 6 (07): : 412 - 417

← 1 2 3 4 5 →