Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles

被引：14
|
作者：
Kilic, Bayram [1 ]
Ipek, Osman [2 ]
机构：
[1] Mehmet Akif Ersoy Univ, Bucak Emin Gulmez Vocat Sch, Burdur, Turkey
[2] Suleyman Demirel Univ, Fac Engn, TR-32260 Isparta, Turkey
来源：
HEAT AND MASS TRANSFER | 2017年 / 53卷 / 02期
关键词：
PRESSURE-DROP; CONDENSATION; R410A; R407C;
D O I：
10.1007/s00231-016-1817-2
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this study, heat transfer rate and effectiveness of corrugated plate heat exchangers having different chevron angles were investigated experimentally. Chevron angles of plate heat exchangers are beta = 30A degrees and beta = 60A degrees. For this purpose, experimentally heating system used plate heat exchanger was designed and constructed. Thermodynamic analysis of corrugated plate heat exchangers having different chevron angles were carried out. The heat transfer rate and effectiveness values are calculated. The experimental results are shown that heat transfer rate and effectiveness values for beta = 60A degrees is higher than that of the other. Obtained experimental results were graphically presented.
引用
收藏
页码：725 / 731
页数：7
相关论文
共 50 条
  • [41] Numerical evaluation of heat transfer in corrugated heat exchangers
    Chorak, Aicha
    Ihringer, Ernest
    Ben Abdellah, Abdellatif
    Dhimdi, Said
    Essadiqi, El Hachmi
    Bouya, Mohsine
    Faqir, Mustapha
    2014 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2014, : 401 - 406
  • [42] Experimental analysis of heat transfer of supercritical fluids in plate heat exchangers
    Forooghi, Pourya
    Hooman, Kamel
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 74 : 448 - 459
  • [43] Study of carbon dioxide condensation in chevron plate exchangers; heat transfer analysis
    Hayes, N.
    Jokar, Amir
    Ayub, Zahid H.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (5-6) : 1121 - 1131
  • [44] Experimental Investigation of Impinging Heat Transfer of the Pulsed Chevron Jet on a Semicylindrical Concave Plate
    Lyu, Yuan-wei
    Zhang, Jing-zhou
    Liu, Xi-cheng
    Shan, Yong
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2019, 141 (03):
  • [45] Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers
    Li, Wei
    Li, Hong-xia
    Li, Guan-qiu
    Yao, Shi-chune
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 63 : 351 - 360
  • [46] Comparison of thermal performance in solution heat exchangers with different chevron angles in absorption system
    Ham, Jeonggyun
    Kim, Eui
    You, Nayoung
    Cho, Honghyun
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 51
  • [47] A novel wavy chevron design for plate heat exchangers: experimental and numerical analysis
    Farshidian Far, Alireza
    Bashirnezhad, Kazem
    Bashi Shahabi, Peyman
    Jahanpour, Javad
    CHEMICAL ENGINEERING COMMUNICATIONS, 2023, 210 (04) : 449 - 459
  • [48] INVESTIGATION ON HEAT TRANSFER ENHANCEMENT AND VELOCITY MATCHING IN HEAT EXCHANGERS BY USING CORRUGATED TUBES
    Chen, Xin
    Wang, Wei
    Han, Huaizhi
    Li, Bingxi
    Zhang, Yaning
    HEAT TRANSFER RESEARCH, 2020, 51 (17) : 1545 - 1564
  • [49] Effect of the Chevron Angle on Cooling Heat Transfer Characteristics of Supercritical Pressure Fluids in Plate Heat Exchangers
    Miyata, Kazushi
    Mori, Hideo
    Taniguchi, Takahiro
    Umezawa, Shuichi
    Sugita, Katsuhiko
    HEAT TRANSFER ENGINEERING, 2019, 40 (12) : 1007 - 1022
  • [50] Effect of Corrugation Angle on Heat Transfer Studies of Viscous Fluids in Corrugated Plate Heat Exchangers
    Rao, B. Sreedhara
    Gajanan, Surywanshi D.
    Varun, S.
    Krishna, M. V. S. Murali
    Sastry, R. C.
    INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY INNOVATION, 2015, 5 (02) : 99 - 107
12345