The variations of microstructures and hardness of titanium matrix composite (TiB + TiC)/Ti-6Al-4V after shot peening

被引：13

作者：

Xie, Lechun ^{[1
]}

Wang, Liqiang ^{[1
]}

Jiang, Chuanhai ^{[1
]}

Lu, Weijie ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2014年 / 244卷

关键词：

Shot peening; Microstructure; Hardness; Reinforcement; Nano-indentation; SURFACE-LAYER CHARACTERISTICS; IN-SITU; MECHANICAL-PROPERTIES; TI-6AL-4V/TIB COMPOSITES; ALLOY COMPOSITES; ELASTIC-MODULI; CASTING ROUTE; TIB; DEFORMATION; ALUMINUM;

D O I：

10.1016/j.surfcoat.2014.01.053

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

After shot peening (SP), the variations of microstructures and hardness of (TiB + TiC)/Ti-6Al-4V were investigated. The microstructures of the surface and cross-section were studied, and the results revealed that the convex and concave features appeared on the surface after SP. Based on the microstructures of cross-section, the micrograph showed the random inclination of reinforcements in the surface layer, which illuminated that the reinforcements were yielded to the random deformation of matrix during SP. The variations of hardness before and after SP were investigated via the nano-indentation method. The results indicated that the variations of hardness were caused by the different extent of deformation under surface. All results were discussed in detail. (c) 2014 Elsevier B.V. All rights reserved.

引用

页码：69 / 77

页数：9

共 50 条

[21] Ti-6Al-4V Fatigue Strength After Shot Peening: The Role of a Corrosive Environment
Sonntag, Robert
Reinders, Joern
Gibmeier, Jens
Jaeger, Sebastian
Kretzer, J. Philippe
FATIGUE AND FRACTURE OF MEDICAL METALLIC MATERIALS AND DEVICES: 3RD VOLUME, 2014, 1559 : 98 - 108
[22] Characterization on Surface Properties of Ti-6Al-4V After Multiple Shot Peening Treatments
Xie, Lechun
Wen, Yan
Wang, Liqiang
Jiang, Chuanhai
Ji, Vincent
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (04):
[23] Thermal relaxation of residual stresses in shot peened surface layer of (TiB + TiC)/Ti-6Al-4V composite at elevated temperatures
Xie, Lechun
Jiang, Chuanhai
Ji, Vincent
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (21): : 6478 - 6483
[24] Microstructural Modeling and Strengthening Mechanism of TiB/Ti-6Al-4V Discontinuously-Reinforced Titanium Matrix Composite
Zhao, Shuai
Xu, Yangjian
Pan, Changliang
Liang, Lihua
Wang, Xiaogui
MATERIALS, 2019, 12 (05):
[25] The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons
Liu, Kevin K.
Hill, Michael R.
TRIBOLOGY INTERNATIONAL, 2009, 42 (09) : 1250 - 1262
[26] Hot Deformation Behaviors in Ti-6Al-4V/(TiB + TiC) Composites
Xuejian Lin
Hongjun Huang
Fuyu Dong
Yue Zhang
Xiaoguang Yuan
Bowen Zheng
Xiaojiao Zuo
Acta Metallurgica Sinica (English Letters), 2021, 34 : 1747 - 1757
[27] Coverage and Peening Angle Effects in Shot Peening on HCF Performance of Ti-6Al-4V
Fuhr, Jochen P.
Basha, Mahmoud
Wollmann, Manfred
Wagner, Lothar
7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017, 2018, 213 : 682 - 690
[28] Hot Deformation Behaviors in Ti-6Al-4V/(TiB + TiC) Composites
Lin, Xuejian
Huang, Hongjun
Dong, Fuyu
Zhang, Yue
Yuan, Xiaoguang
Zheng, Bowen
Zuo, Xiaojiao
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (12) : 1747 - 1757
[29] Effect of hydrogen on microstructure and high temperature deformation of (TiB + TiC)/Ti-6Al-4V composite
Lu, Junqiang
Qin, Jining
Lu, Weijie
Zhang, Di
Hou, Hongliang
Li, Zhiqiang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 500 (1-2): : 1 - 7
[30] Nanocrystallization of martensite steels and Ti-6Al-4V alloy by shot peening
Todaka, Y
Umemoto, M
Watanabe, Y
Tsuchiya, K
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2005, 24-25 : 471 - 474

← 1 2 3 4 5 →