FATIGUE CHARACTERIZATION OF ALUMINIUM WELDED JOINTS

被引：0
|
作者：
Croccolo, Dario [1 ]
De Agostinis, Massimiliano [1 ]
Fini, Stefano [1 ]
Olmi, Giorgio [1 ]
机构：
[1] Univ Bologna, Dept Ind Engn, Bologna, Italy
来源：
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017) | 2017年
关键词：
fatigue; aluminium; weld; vacuum casting alloy; FREQUENCY; ALLOY;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This contribution deals with the fatigue characterization of aluminium welded joints for automotive applications. The base material is a vacuum casting alloy, whereas the joints have been hand welded by means of the TIG process. The joint category is a butt-welded type, one side only, full penetration without backing. The samples have been tested both in tensiontension and in bending. Tests results have been processed according to the ISO 12107 standard: SN curves have been retrieved as well as the endurance limit of the joints at 5.10(6) cycles.
引用
收藏
页码：1331 / 1338
页数：8
相关论文
共 50 条
  • [21] Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints
    Pereira, A. M.
    Ferreira, A. M.
    Antunes, F. V.
    Bartolo, P. J.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (14-15) : 1432 - 1450
  • [22] Fatigue properties of welded T-joints in thin-walled aluminium profiles
    Hagstrom, J
    Sandstrom, R
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1727 - 1732
  • [23] Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints
    Gotoh, Koji
    Murakami, Koji
    Noda, Yasuo
    JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, 2011, 16 (03) : 343 - 353
  • [24] Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints
    Department of Marine Systems Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
    不详
    J. Marine Sci. Technol., 3 (343-353):
  • [25] Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints
    Koji Gotoh
    Koji Murakami
    Yasuo Noda
    Journal of Marine Science and Technology, 2011, 16
  • [26] Fatigue strength of welded joints of 6N01 aluminium alloy extrusions
    Matsuoka, Kazuyoshi
    Uemura, Takeshi
    Kamata, Keiji
    Chiaki, Sadayoshi
    Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction, 1994, 32 (05): : 1 - 8
  • [27] FATIGUE MASTER CURVE APPROACH FOR ARC-WELDED ALUMINIUM JOINTS ∼ MEAN STRESS EFFECTS
    den Besten, J. H.
    Huijsmans, R. H. M.
    OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 3: MATERIALS TECHNOLOGY, 2011, : 393 - 401
  • [28] Fatigue life improvement of mig welded aluminium T-joints by friction stir processing
    Costa, J. D. M.
    Jesus, J. S.
    Loureiro, A.
    Ferreira, J. A. M.
    Borrego, L. P.
    INTERNATIONAL JOURNAL OF FATIGUE, 2014, 61 : 244 - 254
  • [29] Effect of Subsurface Defects and Joint Preparations on the Fatigue Behavior of Welded Joints in Aluminium Alloys.
    Tourrade, J.-C.
    Soudage et Techniques Connexes, 1985, 39 (5-6): : 171 - 176
  • [30] Fatigue crack propagation behaviour of welded and weld-repaired 5083 aluminium alloy joints
    Wu, WD
    Shankar, K
    RISK, ECONOMY AND SAFETY, FAILURE MINIMISATION AND ANALYSIS: FAILURES 2000, 2000, : 453 - +
12345