Experimental Investigation on Transient Process of A New-Type Heat-pipe Heat-sink

被引:0
|
作者
Xie Xuliang [1 ]
机构
[1] Changan Univ, Sch Automobile, Xian 710064, Shaanxi, Peoples R China
关键词
heat pipe; heat sink; chip cooling; thermal performance; transient process; experimental investigation;
D O I
10.4028/www.scientific.net/KEM.474-476.880
中图分类号
TP301 [理论、方法];
学科分类号
081202 ;
摘要
In order to verify whether a new kind heat pipe heat sink can meet the requirement of high energy chip cooling or not, an experiment was conducted under heating and cooling process with a constant airflow rate. The transient heat exchange rate and transient temperature response of four thermocouples mounted on the upwind surface of the heat sink condenser were obtained. Results show that heat resistance decreases with increase in heat transfer rate under heating process, and the heat resistance is about 0.22K/W with the airflow rate 40m(3)/h. The transient temperature response is also analyzed with theory.
引用
收藏
页码:880 / 882
页数:3
相关论文
共 50 条
  • [41] Thermal performance of silicon-die/water-cooled heat-sink assembly: Experimental investigation
    Marotta, EE
    Ellsworth, M
    Mazzuca, S
    Eberth, JF
    JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2004, 18 (02) : 193 - 202
  • [42] Development and study on heat-pipe type vacuum absorber tube
    Wang Jun
    Zhang Yaoming
    Liu Deyou
    Guo Su
    PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V, 2007, : 1818 - +
  • [43] Study on the condensation heat-exchange characteristic of a separate-type heat-pipe
    Zhu, Yuqin
    Xi'an Shiyou Xueyuan Xuebao/Journal of Xi'an Petroleum Institute (Natural Science Edition), 2000, 15 (05): : 72 - 74
  • [44] Experimental study on water separation process in a novel spray flash vacuum evaporator with heat-pipe
    Gao, Wenzhong
    Li, Changsong
    Xu, Changda
    Wang, Dong
    DESALINATION, 2016, 386 : 39 - 47
  • [45] Feasibility study on the application of a heat-pipe type adsorption chiller
    Ahn, Sang Hyeok
    Kwon, Oh Kyung
    Chung, Jae Dong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (01) : 421 - 428
  • [46] Effect of the Arrangement of a New-Type of Turbulator Inserts on Heat Pipe Exchanger Performances
    Hasan, Ibtisam A.
    Maki, Wafa
    FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2023, 19 (10): : 2749 - 2759
  • [47] An Experimental Investigation of an Oscillating Heat Pipe Heat Spreader
    Laun, F. F.
    Lu, H.
    Ma, H. B.
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2015, 7 (02)
  • [48] Experimental investigation on active heat sink with heat pipe assistance for high-power automotive LED headlights
    Tang, Yifan
    Luo, Yuhao
    Du, Pengyuan
    Wang, Huawei
    Ma, Haonan
    Qin, Yuanfeng
    Bai, Pengfei
    Zhou, Guofu
    CASE STUDIES IN THERMAL ENGINEERING, 2021, 28
  • [49] Investigation of boiling heat transfer process in the barrel of a gravity heat pipe type extruder
    Yu, Rui-Li
    Qin, Bi-Ming
    Wang, Xiao-Yu
    Li, Qian-Fan
    Dong, Dan-Dan
    Xia, Liang-Zhi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 219
  • [50] Performance analysis of heat pipe aided NEPCM heat sink for transient electronic cooling
    Kumar, K. R. Suresh
    Dinesh, R.
    Roseline, A. Ameelia
    Kalaiselvam, S.
    MICROELECTRONICS RELIABILITY, 2017, 73 : 1 - 13