Phase Development in the Sintering of a Hematite-Ilmenite Ore Blend

被引：6

作者：

Chiwandika, Edson K. ^{[1
]}

Cho, Seong-Kyu ^{[1
]}

Jung, Sung-Mo ^{[1
]}

机构：

[1] POSTECH, Grad Inst Ferrous Technol, Pohang 37673, South Korea

来源：

MINERALS | 2020年 / 10卷 / 09期

关键词：

sintering; phase development; element distribution; melt formation; perovskite; SILICO-FERRITE; ALUMINUM SFCA; CALCIUM; IRONSAND; BEHAVIOR; VANADIUM;

D O I：

10.3390/min10090800

中图分类号：

P3 [地球物理学]; P59 [地球化学];

学科分类号：

0708 ; 070902 ;

摘要：

The use of low-grade iron ores has attracted a lot of interest where fines from these ores are sintered to improve their strength. Ti-containing ores are one of the abundantly available iron ores of low-grade. The sintering of the hematite-ilmenite ore blends has several challenges, which include the formation of perovskite. The sintering behavior of a hematite-ilmenite ore sinter blend was investigated in 75 vol% N-2, 24 vol% CO2, and 1 vol% CO in the temperature range of 1373 to 1523 K. Phase development and distribution of metallic elements were investigated by x-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and electron probe microanalysis (EPMA). The addition of ilmenite ore to hematite ore increased the temperature of melt formation. More titanium (Ti) was distributed in the glass phase with increasing temperature. Morphological change showed that the amount of sinter-bonding phase generated was low, below 1473 K. Weak sinter bonding strength might be caused by the presence of Ti in the glass phase at high temperature. This might affect the fracture toughness of the glass phase.

引用

页码：1 / 13

页数：13

共 50 条

[21] CALCULATION OF COHERENT SOLVI FOR ALKALI FELDSPAR, IRON-FREE CLINOPYROXENE, NEPHELINE-KALSILITE, AND HEMATITE-ILMENITE
TULLIS, J
YUND, RA
AMERICAN MINERALOGIST, 1979, 64 (9-10) : 1063 - 1074
[22] IMPROVING SINTERING PERFORMANCE OF ORE BLEND CONTAINING PISOLITIC ORE
LOO, CE
WITCHARD, D
PENNY, GC
TRANSACTIONS OF THE INSTITUTION OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 1994, 103 : C135 - C146
[23] Improving sintering performance of ore blend containing pisolitic ore
Loo, C.E.
Witchard, D.
Penny, G.C.
Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 1994, 103
[24] Chemical, magnetic and charge ordering in the system hematite-ilmenite, Fe2O3-FeTiO3
Burton, BP
Chaka, A
Singh, DJ
PHASE TRANSITIONS, 2005, 78 (1-3) : 239 - 249
[25] Microstructural properties of (11(2)over-bar 0)-oriented hematite-ilmenite solid solution films
Fujii, Tatsuo
Mino, Tomohiro
Kanamaru, Shunsuke
Nakanishi, Makoto
Hashimoto, Hideki
Takada, Jun
THIN SOLID FILMS, 2015, 591 : 245 - 249
[26] Determination of magnetic properties of rocks by analysis of demagnetization curves: Hematite-ilmenite bearing rocks from SW Sweden
Eneroth, Erik
Johansson, Leif
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 2008, 113 (B2)
[27] The role of hematite-ilmenite solid solution in the production of magnetic anomalies in ground- and satellite-based data
Kletetschka, G
Wasilewski, PJ
Taylor, PT
TECTONOPHYSICS, 2002, 347 (1-3) : 167 - 177
[28] Influence of Flux on Sintering Property of Imported Hematite Ore
Zhang, Jinzhu
Huang, Jun
ADVANCED RESEARCH ON MATERIAL SCIENCE, ENVIRONMENTAL SCIENCE AND COMPUTER SCIENCE, 2011, 322 : 139 - 143
[29] SINTERING PERFORMANCE OF MAGNETITE-HEMATITE-GOETHITE AND HEMATITE-GOETHITE IRON ORE BLENDS AND MICROSTRUCTURE OF PRODUCTS OF SINTERING
Ooi, Tze Chean
Campbell-Hardwick, Simon
Zhu, Deqing
Pan, Jian
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2014, 35 (04): : 266 - 281
[30] Mineralogical Process Investingation on the Sintering Ore Made of Hematite in Sijiaying
Han Xiuli
Li Changcun
Liu Lina
Chen Wen
Liu Xiaomin
2010 INTERNATIONAL CONFERENCE ON MINING ENGINEERING AND METALLURGICAL TECHNOLOGY (MEMT 2010), 2010, : 95 - 100

← 1 2 3 4 5 →