Characterization of intermetallic phase in as-cast Si-doped Co-Cr-Mo alloys

被引:1
|
作者
Tunthawiroon, P. [1 ]
Chiba, A. [2 ]
机构
[1] King Mongkuts Inst Technol Ladkrabang, Dept Ind Engn, Fac Engn, Bangkok 10520, Thailand
[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan
关键词
MECHANICAL-PROPERTIES; COCRMO ALLOYS; WEAR BEHAVIOR; SIGMA-PHASE; MICROSTRUCTURE;
D O I
10.1088/1757-899X/635/1/012007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This research aims to investigate the effects of Si concentrations on the microstructure and formation of the intermetallic phase of Co-Cr-Mo-xSi alloys. The Si concentration (x) was varied between 0.1, 0.5, 1.0, 3.0 and 5.0 wt%. The microstructure and intermetallic phase of the solution heat-treated Co-Cr-Mo alloys were characterized using SEM-EDX, XRD and TEM. The microstructure analysis revealed that Si concentration played a role in the evolution of intermetallic phase precipitating in Co-Cr-Mo alloys. Two types of intermetallic phased were found in the Si-doped Co-Cr-Mo alloys. The sigma phase was identified in the alloys containing Si between 0.1-1.0 wt% while the increase in Si (3.0-5.0Si) contributed to the formation of the. phase. The calculated lattice parameters of the intermetallic phase precipitated in the 3.0Si and 5.0Si alloys correlated well with those of Co5Cr3Si2 phase.
引用
收藏
页数:6
相关论文
共 50 条
  • [31] Effect of alloy preheating on the mechanical properties of As-cast Co-Cr-Mo-C alloys
    Montero-Ocampo, C
    Talavera, M
    Lopez, H
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (03): : 611 - 620
  • [32] IMPACT TESTING OF CAST CO-CR-MO ALLOY FOR SURGICAL IMPLANTS
    STURLASON, A
    LANGER, EW
    SCANDINAVIAN JOURNAL OF METALLURGY, 1985, 14 (06) : 313 - 315
  • [33] Effect of alloy preheating on the mechanical properties of as-cast Co-Cr-Mo-C alloys
    C. Montero-Ocampo
    H. Lopez
    M. Talavera
    Metallurgical and Materials Transactions A, 1999, 30 : 611 - 620
  • [34] Interdiffusion and Atomic Mobilities in fcc Co-Cr-Mo Alloys
    C. P. Wang
    S. Y. Qin
    Y. Lu
    Y. Yu
    J. J. Han
    X. J. Liu
    Journal of Phase Equilibria and Diffusion, 2018, 39 : 437 - 445
  • [35] Electrochemical and Hot Deformation Behaviour of Co-Cr-Mo Alloys
    Behera, A. N.
    Paul, B.
    Chaudhary, R. K.
    Mishra, P.
    Hubli, R. C.
    Chakravartty, J. K.
    MATERIALS TODAY-PROCEEDINGS, 2016, 3 (09) : 3162 - 3171
  • [36] Passivity of Co-Cr-Mo alloys in lactic acid solutions
    Hadzipasic, A. Begic
    Malina, J.
    Matkovic, T.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2010, 48 (04): : 265 - 270
  • [37] Interdiffusion and Atomic Mobilities in fcc Co-Cr-Mo Alloys
    Wang, C. P.
    Qin, S. Y.
    Lu, Y.
    Yu, Y.
    Han, J. J.
    Liu, X. J.
    JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2018, 39 (04) : 437 - 445
  • [38] The Effects of Cr and Mo on the Microstructure and Mechanical Properties of As-Cast TiAl Alloys
    Husni
    Noor, Ahmad Fauzi Mohd
    Astrawinata, Rizal
    JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 2013, 45 (03): : 294 - 306
  • [39] MICROSTRUCTURE AND PROPERTIES OF AS-CAST INTERMETALLIC MG2SI-AL ALLOYS
    SCHMID, EE
    VONOLDENBURG, K
    FROMMEYER, G
    ZEITSCHRIFT FUR METALLKUNDE, 1990, 81 (11): : 809 - 815
  • [40] The production and properties of wrought high carbon Co-Cr-Mo alloys
    Berry, G
    Bolton, JD
    Brown, JB
    McQuaide, S
    COBALT-BASE ALLOYS FOR BIOMEDICAL APPLICATIONS, 1999, 1365 : 11 - 31