Characterization of intermetallic phase in as-cast Si-doped Co-Cr-Mo alloys

被引:1
|
作者
Tunthawiroon, P. [1 ]
Chiba, A. [2 ]
机构
[1] King Mongkuts Inst Technol Ladkrabang, Dept Ind Engn, Fac Engn, Bangkok 10520, Thailand
[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan
关键词
MECHANICAL-PROPERTIES; COCRMO ALLOYS; WEAR BEHAVIOR; SIGMA-PHASE; MICROSTRUCTURE;
D O I
10.1088/1757-899X/635/1/012007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This research aims to investigate the effects of Si concentrations on the microstructure and formation of the intermetallic phase of Co-Cr-Mo-xSi alloys. The Si concentration (x) was varied between 0.1, 0.5, 1.0, 3.0 and 5.0 wt%. The microstructure and intermetallic phase of the solution heat-treated Co-Cr-Mo alloys were characterized using SEM-EDX, XRD and TEM. The microstructure analysis revealed that Si concentration played a role in the evolution of intermetallic phase precipitating in Co-Cr-Mo alloys. Two types of intermetallic phased were found in the Si-doped Co-Cr-Mo alloys. The sigma phase was identified in the alloys containing Si between 0.1-1.0 wt% while the increase in Si (3.0-5.0Si) contributed to the formation of the. phase. The calculated lattice parameters of the intermetallic phase precipitated in the 3.0Si and 5.0Si alloys correlated well with those of Co5Cr3Si2 phase.
引用
收藏
页数:6
相关论文
共 50 条
  • [1] Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys
    Giacchi, J. V.
    Morando, C. N.
    Fornaro, O.
    Palacio, H. A.
    MATERIALS CHARACTERIZATION, 2011, 62 (01) : 53 - 61
  • [2] Effects of Si concentrations on microstructure and mechanical properties of as-cast Co-Cr-Mo alloys
    Tunthawiroon, P.
    Chiba, A.
    10TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MANUFACTURING (ICMM 2019), 2019, 635
  • [3] Phase composition of cast dental Ni-Cr-Mo and Co-Cr-Mo alloys
    Braude, IS
    Gal'tsov, NN
    Prokhvatilov, AI
    Dotsenko, VI
    Chaika, EN
    PHYSICS OF METALS AND METALLOGRAPHY, 2005, 100 (02): : 165 - 171
  • [4] Microstructure of As-cast Co-Cr-Mo Alloy Prepared by Investment Casting
    Jong Bum Park
    Kyung-Hwan Jung
    Kang Min Kim
    Yong Son
    Jung-Il Lee
    Jeong Ho Ryu
    Journal of the Korean Physical Society, 2018, 72 : 947 - 951
  • [5] Microstructure of As-cast Co-Cr-Mo Alloy Prepared by Investment Casting
    Park, Jong Bum
    Jung, Kyung-Hwan
    Kim, Kang Min
    Son, Yong
    Lee, Jung-Il
    Ryu, Jeong Ho
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2018, 72 (08) : 947 - 951
  • [6] Microstructural characterization of as-cast Cr-Si alloys
    Chad, V. M.
    Faria, M. I. S. T.
    Coelho, G. C.
    Nunes, C. A.
    Suzuki, P. A.
    MATERIALS CHARACTERIZATION, 2008, 59 (01) : 74 - 78
  • [7] Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co-Cr-Mo alloys for dental applications
    Yoda, Keita
    Suyalatu
    Takaichi, Atsushi
    Nomura, Naoyuki
    Tsutsumi, Yusuke
    Doi, Hisashi
    Kurosu, Shingo
    Chiba, Akihiko
    Igarashi, Yoshimasa
    Hanawa, Takao
    ACTA BIOMATERIALIA, 2012, 8 (07) : 2856 - 2862
  • [8] Microstructural characterization of as-cast Co-Si alloys
    Fania, MIST
    Coelho, GC
    Nunes, CA
    Avillez, RR
    MATERIALS CHARACTERIZATION, 2006, 56 (01) : 66 - 72
  • [9] CARBIDE PRECIPITATION IN CAST CO-CR-MO ALLOYS USED FOR SURGICAL IMPLANTS
    ZHUANG, L
    LANGER, EW
    ZEITSCHRIFT FUR METALLKUNDE, 1989, 80 (04): : 251 - 257
  • [10] Phase characterization in as-cast F-75 Co–Cr–Mo–C alloy
    R. Rosenthal
    B. R. Cardoso
    I. S. Bott
    R. P. R. Paranhos
    E. A. Carvalho
    Journal of Materials Science, 2010, 45 : 4021 - 4028